Next: Obtaining R, Previous: (dir), Up: (dir) [Contents][Index]
This is a guide to installation and administration for R.
This manual is for R, version 3.1.1 (2014-07-10).
Copyright © 2001–2013 R Core Team
Permission is granted to make and distribute verbatim copies of this manual provided the copyright notice and this permission notice are preserved on all copies.
Permission is granted to copy and distribute modified versions of this manual under the conditions for verbatim copying, provided that the entire resulting derived work is distributed under the terms of a permission notice identical to this one.
Permission is granted to copy and distribute translations of this manual into another language, under the above conditions for modified versions, except that this permission notice may be stated in a translation approved by the R Core Team.
Next: Installing R under Unix-alikes, Previous: Top, Up: Top [Contents][Index]
Sources, binaries and documentation for R can be obtained via CRAN, the “Comprehensive R Archive Network” whose current members are listed at http://CRAN.R-project.org/mirrors.html.
• Getting and unpacking the sources: | ||
• Getting patched and development versions: |
Next: Getting patched and development versions, Previous: Obtaining R, Up: Obtaining R [Contents][Index]
The simplest way is to download the most recent R-x.y.z.tar.gz file, and unpack it with
tar -xf R-x.y.z.tar.gz
on systems that have a suitable1 tar
installed. On other systems you need to
have the gzip
program installed, when you can use
gzip -dc R-x.y.z.tar.gz | tar -xf -
The pathname of the directory into which the sources are unpacked should
not contain spaces, as most make
programs (and specifically
GNU make
) do not expect spaces.
If you want the build to be usable by a group of users, set umask
before unpacking so that the files will be readable by the target group
(e.g., umask 022
to be usable by all users). Keep this
setting of umask
whilst building and installing.
If you use a recent GNU version of tar
and do this as a root
account (which on Windows includes accounts with administrator
privileges) you may see many warnings about changing ownership. In
which case you can use
tar --no-same-owner -xf R-x.y.z.tar.gz
and perhaps also include the option --no-same-permissions.
(These options can also be set in the TAR_OPTIONS
environment
variable: if more than one option is included they should be separated
by spaces.)
Previous: Getting and unpacking the sources, Up: Obtaining R [Contents][Index]
A patched version of the current release, ‘r-patched’, and the current development version, ‘r-devel’, are available as daily tarballs and via access to the R Subversion repository. (For the two weeks prior to the release of a minor (3.x.0) version, ‘r-patched’ tarballs may refer to beta/release candidates of the upcoming release, the patched version of the current release being available via Subversion.)
The tarballs are available from ftp://ftp.stat.math.ethz.ch/pub/Software/R/. Download R-patched.tar.gz or R-devel.tar.gz (or the .tar.bz2 versions) and unpack as described in the previous section. They are built in exactly the same way as distributions of R releases.
• Using Subversion and rsync: |
Previous: Getting patched and development versions, Up: Getting patched and development versions [Contents][Index]
Sources are also available via https://svn.R-project.org/R/, the R Subversion repository. If you have a Subversion client (see http://subversion.apache.org/), you can check out and update the current ‘r-devel’ from https://svn.r-project.org/R/trunk/ and the current ‘r-patched’ from ‘https://svn.r-project.org/R/branches/R-x-y-branch/’ (where x and y are the major and minor number of the current released version of R). E.g., use
svn checkout https://svn.r-project.org/R/trunk/ path
to check out ‘r-devel’ into directory path (which will be created if necessary). The alpha, beta and RC versions of an upcoming x.y.0 release are available from ‘https://svn.r-project.org/R/branches/R-x-y-branch/’ in the four-week period prior to the release.
Note that ‘https:’ is required2, and that the SSL certificate for the Subversion server of the R project should be recognized as from a trusted source.
Note that retrieving the sources by e.g. wget -r
or
svn export
from that URL will not work (and will give a error
early in the make
process): the Subversion information is
needed to build R.
The Subversion repository does not contain the current sources for the
recommended packages, which can be obtained by rsync
or
downloaded from CRAN. To use rsync
to install the
appropriate sources for the recommended packages, run
./tools/rsync-recommended
from the top-level directory of the
R sources.
If downloading manually from CRAN, do ensure that you have the
correct versions of the recommended packages: if the number in the file
VERSION is ‘x.y.z’ you need to download
the contents of ‘http://CRAN.R-project.org/src/contrib/dir’,
where dir is ‘x.y.z/Recommended’ for
r-devel or x.y-patched/Recommended for r-patched,
respectively, to directory src/library/Recommended in the sources
you have unpacked. After downloading manually you need to execute
tools/link-recommended
from the top level of the sources to
make the requisite links in src/library/Recommended. A suitable
incantation from the top level of the R sources using wget
might be (for the correct value of dir)
wget -r -l1 --no-parent -A\*.gz -nd -P src/library/Recommended \ http://CRAN.R-project.org/src/contrib/dir ./tools/link-recommended
Next: Installing R under Windows, Previous: Obtaining R, Up: Top [Contents][Index]
R will configure and build under most common Unix and Unix-alike platforms including ‘cpu-*-linux-gnu’ for the ‘alpha’, ‘arm’, ‘hppa’, ‘ix86’, ‘ia64’, ‘m68k’, ‘mips’, ‘mipsel’, ‘powerpc’, ‘s390’, ‘sparc’, and ‘x86_64’ CPUs, ‘x86_64-apple-darwin’, ‘i386-sun-solaris’ and ‘sparc-sun-solaris’ as well as perhaps (it is tested less frequently on these platforms) ‘i386-apple-darwin’, ‘i386-*-freebsd’, ‘x86_64-*-freebsd’, ‘i386-*-netbsd’, ‘i386-*-openbsd’ and ‘powerpc-ibm-aix6*’
In addition, binary distributions are available for some common Linux distributions and for OS X (formerly Mac OS). See the FAQ for current details. These are installed in platform-specific ways, so for the rest of this chapter we consider only building from the sources.
• Simple compilation: | ||
• Help options: | ||
• Making the manuals: | ||
• Installation: | ||
• Uninstallation: | ||
• Sub-architectures: | ||
• Other Options: | ||
• Testing a Unix-alike Installation: |
Next: Help options, Previous: Installing R under Unix-alikes, Up: Installing R under Unix-alikes [Contents][Index]
First review the essential and useful tools and libraries in
Essential and useful other programs under a Unix-alike, and install
those you
want or need. Ensure that the environment variable TMPDIR
is
either unset (and /tmp exists and can be written in and scripts
can be executed from) or points to the absolute path to a valid
temporary directory (one from which execution of scripts is allowed)
which does not contain spaces.3
Choose a directory to install the R tree (R is not just a binary, but has additional data sets, help files, font metrics etc). Let us call this place R_HOME. Untar the source code. This should create directories src, doc, and several more under a top-level directory: change to that top-level directory (At this point North American readers should consult Setting paper size.) Issue the following commands:
./configure make
(See Using make if your make is not called ‘make’.) Users of Debian-based 64-bit systems4 may need
./configure LIBnn=lib make
Then check the built system works correctly by
make check
Failures are not necessarily problems as they might be caused by missing
functionality,5 but you should look carefully at any
reported discrepancies. (Some non-fatal errors are expected in locales
that do not support Latin-1, in particular in true C
locales and
non-UTF-8 non-Western-European locales.) A failure in
tests/ok-errors.R may indicate inadequate resource limits
(see Running R).
More comprehensive testing can be done by
make check-devel
or
make check-all
see file tests/README and Testing a Unix-alike Installation for the possibilities of doing this in parallel. Note that these checks need the recommended packages to be installed.
If the command configure
and make
commands execute
successfully, a shell-script front-end called R will be created
and copied to R_HOME/bin. You can link or copy this script
to a place where users can invoke it, for example to
/usr/local/bin/R. You could also copy the man page R.1 to
a place where your man
reader finds it, such as
/usr/local/man/man1. If you want to install the complete R
tree to, e.g., /usr/local/lib/R, see Installation. Note:
you do not need to install R: you can run it from where it was
built.
You do not necessarily have to build R in the top-level source directory (say, TOP_SRCDIR). To build in BUILDDIR, run
cd BUILDDIR TOP_SRCDIR/configure make
and so on, as described further below. This has the advantage of always
keeping your source tree clean and is particularly recommended when you
work with a version of R from Subversion. (You may need
GNU make
to allow this, and you will need no spaces
in the path to the build directory.)
Now rehash
if necessary, type R, and read the R manuals
and the R FAQ (files FAQ or
doc/manual/R-FAQ.html, or
http://CRAN.R-project.org/doc/FAQ/R-FAQ.html which always
has the version for the latest release of R).
Next: Making the manuals, Previous: Simple compilation, Up: Installing R under Unix-alikes [Contents][Index]
By default HTML help pages are created when needed rather than being built at install time.
If you need to disable the server and want HTML help, there is the
option to build HTML pages when packages are installed
(including those installed with R). This is enabled by the
configure
option --enable-prebuilt-html. Whether
R CMD INSTALL
(and hence install.packages
) pre-builds
HTML pages is determined by looking at the R installation and is
reported by R CMD INSTALL --help
: it can be overridden by
specifying one of the INSTALL
options --html or
--no-html.
The server is disabled by setting the environment variable
R_DISABLE_HTTPD
to a non-empty value, either before R is
started or within the R session before HTML help (including
help.start
) is used. It is also possible that system security
measures will prevent the server from being started, for example if the
loopback interface has been disabled. See
?tools::startDynamicHelp
for more details.
Next: Installation, Previous: Help options, Up: Installing R under Unix-alikes [Contents][Index]
There is a set of manuals that can be built from the sources,
Printed versions of all the help pages for base and recommended packages (over 3300 pages).
Printed versions of the help pages for selected base packages (over 1900 pages)
R FAQ
“An Introduction to R”.
“R Data Import/Export”.
“R Installation and Administration”, this manual.
“Writing R Extensions”.
“The R Language Definition”.
To make these (with ‘fullrefman’ rather than ‘refman’), use
make pdf to create PDF versions make info to create info files (not ‘refman’ nor ‘fullrefman’).
You will not be able to build any of these unless you have
makeinfo
version 4.7 or later installed, and for PDF you must
have texi2dvi
and texinfo.tex installed (which are part
of the GNU texinfo distribution but are, especially
texinfo.tex, often made part of the TeX package in
re-distributions).
The PDF versions can be viewed using any recent PDF viewer: they have
hyperlinks that can be followed. The info files are suitable for
reading online with Emacs or the standalone GNU info
program. The PDF versions will be created using the paper size selected
at configuration (default ISO a4): this can be overridden by setting
R_PAPERSIZE
on the make
command line, or setting R_PAPERSIZE
in the
environment and using make -e
. (If re-making the manuals for
a different paper size, you should first delete the file
doc/manual/version.texi. The usual value for North America would
be ‘letter’.)
There are some issues with making the PDF reference manual, fullrefman.pdf or refman.pdf. The help files contain both ISO Latin1 characters (e.g. in text.Rd) and upright quotes, neither of which are contained in the standard LaTeX Computer Modern fonts. We have provided four alternatives:
times
(The default.) Using standard PostScript fonts, Times Roman, Helvetica
and Courier. This works well both for on-screen viewing and for
printing. One disadvantage is that the Usage and Examples sections may
come out rather wide: this can be overcome by using in addition
either of the options inconsolata
, on a Unix-alike only if found
by configure
) or beramono
, which replace the Courier
monospaced font by Inconsolata or Bera Sans mono respectively. (You
will need a recent version of the appropriate LaTeX package
inconsolata6 or
bera installed: inconsolata is likely to require
upquote.)
Note that in most LaTeX installations this will not actually use the standard fonts for PDF, but rather embed the URW clones NimbusRom, NimbusSans and (for Courier, if used) NimbusMon.
This needs LaTeX packages times, helvetic and (if used) courier installed.
lm
Using the Latin Modern fonts. These are not often installed as
part of a TeX distribution, but can obtained from
http://www.ctan.org/tex-archive/fonts/ps-type1/lm/ and
mirrors. This uses fonts rather similar to Computer Modern, but is not
so good on-screen as times
.
cm-super
Using type-1 versions of the Computer Modern fonts by Vladimir Volovich. This is a large installation, obtainable from http://www.ctan.org/tex-archive/fonts/ps-type1/cm-super/ and its mirrors. These type-1 fonts have poor hinting and so are nowhere near as readable on-screen as the other three options.
ae
A package to use composites of Computer Modern fonts. This works well most of the time, and its PDF is more readable on-screen than the previous two options. There are three fonts for which it will need to use bitmapped fonts, tctt0900.600pk, tctt1000.600pk and tcrm1000.600pk. Unfortunately, if those files are not available, Acrobat Reader will substitute completely incorrect glyphs so you need to examine the logs carefully.
The default can be overridden by setting the environment variable
R_RD4PDF
. (On Unix-alikes, this will be picked up at install time
and stored in etc/Renviron, but can still be overridden when the
manuals are built, using make -e
.) The usual 7 default value for R_RD4PDF
is
‘times,inconsolata,hyper’: omit ‘hyper’ if you do not want
hyperlinks (e.g. for printing the manual) or do not have LaTeX
package hyperref, and omit ‘inconsolata’ if you do not have
LaTeX package inconsolata installed.
Further options, e.g for hyperref, can be included in a file Rd.cfg somewhere on your LaTeX search path. For example if you prefer the text and not the page number in the table of contents to be hyperlinked, use
\ifthenelse{\boolean{Rd@use@hyper}}{\hypersetup{linktoc=section}}{}
or
\ifthenelse{\boolean{Rd@use@hyper}}{\hypersetup{linktoc=all}}{}
to hyperlink both text and page number8.
Ebook versions in one or both of .epub and .mobi formats can be made by running in doc/manual one of
make ebooks make epub make mobi
This requires ebook-convert
from Calibre
(http://calibre-ebook.com/download), or from most Linux
distributions). If necessary the path to ebook-convert
can be
set as make macro EBOOK
to by editing doc/manual/Makefile
(which contains a commented value suitable for OS X).
Next: Uninstallation, Previous: Making the manuals, Up: Installing R under Unix-alikes [Contents][Index]
To ensure that the installed tree is usable by the right group of users,
set umask
appropriately (perhaps to ‘022’) before unpacking
the sources and throughout the build process.
After
./configure make make check
(or, when building outside the source,
TOP_SRCDIR/configure
, etc) have been completed
successfully, you can install the complete R tree to your system by
typing
make install
A parallel make can be used (but run make
before make
install
).
This will install to the following directories:
the front-end shell script and other scripts and executables
the man page
all the rest (libraries, on-line help system, …). Here LIBnn is usually ‘lib’, but may be ‘lib64’ on some 64-bit Linux systems. This is known as the R home directory.
where prefix is determined during configuration (typically
/usr/local) and can be set by running configure
with
the option --prefix, as in
./configure --prefix=/where/you/want/R/to/go
This causes make install
to install the R script to
/where/you/want/R/to/go/bin, and so on. The prefix of the
installation directories can be seen in the status message that is
displayed at the end of configure
. You can install into
another directory tree by using
make prefix=/path/to/here install
at least with GNU make
(and current Solaris and
FreeBSD make
, but not some older Unix makes).
More precise control is available at configure time via options: see
configure --help
for details. (However, most of the ‘Fine
tuning of the installation directories’ options are not used by R.)
Configure options --bindir and --mandir are supported
and govern where a copy of the R
script and the man
page are installed.
The configure option --libdir controls where the main R files are installed: the default is ‘eprefix/LIBnn’, where eprefix is the prefix used for installing architecture-dependent files, defaults to prefix, and can be set via the configure option --exec-prefix.
Each of bindir
, mandir
and libdir
can also be
specified on the make install
command line (at least for
GNU make
).
The configure
or make
variables rdocdir
and
rsharedir
can be used to install the system-independent
doc and share directories to somewhere other than
libdir
. The C header files can be installed to the value of
rincludedir
: note that as the headers are not installed into a
subdirectory you probably want something like
rincludedir=/usr/local/include/R-3.1.1
.
If you want the R home to be something other than libdir/R, use rhome: for example
make install rhome=/usr/local/lib64/R-3.1.1
will use a version-specific R home on a non-Debian Linux 64-bit system.
If you have made R as a shared/static library you can install it in your system’s library directory by
make prefix=/path/to/here install-libR
where prefix
is optional, and libdir
will give more
precise control.9 However, you should not install
to a directory mentioned in LDPATHS
(e.g.
/usr/local/lib64) if you intend to work with multiple versions of
R, since that directory may be given precedence over the lib
directory of other R installations.
make install-strip
will install stripped executables, and on platforms where this is supported, stripped libraries in directories lib and modules and in the standard packages.
Note that installing R into a directory whose path contains spaces is not supported, and at least some aspects (such as installing source packages) will not work.
To install info and PDF versions of the manuals, use one or both of
make install-info make install-pdf
Once again, it is optional to specify prefix
, libdir
or
rhome
(the PDF manuals are installed under the R home
directory). (make install-info
needs Perl installed if there
is no command install-info
on the system.)
More precise control is possible. For info, the setting used is that of
infodir
(default prefix/info, set by configure
option --infodir). The PDF files are installed into the R
doc tree, set by the make
variable rdocdir
.
A staged installation is possible, that it is installing R into a
temporary directory in order to move the installed tree to its final
destination. In this case prefix
(and so on) should reflect the
final destination, and DESTDIR
should be used: see
http://www.gnu.org/prep/standards/html_node/DESTDIR.html.
You can optionally install the run-time tests that are part of
make check-all
by
make install-tests
which populates a tests directory in the installation.
Next: Sub-architectures, Previous: Installation, Up: Installing R under Unix-alikes [Contents][Index]
You can uninstall R by
make uninstall
optionally specifying prefix
etc in the same way as specified for
installation.
This will also uninstall any installed manuals. There are specific targets to uninstall info and PDF manuals in file doc/manual/Makefile.
Target uninstall-tests
will uninstall any installed tests, as
well as removing the directory tests containing the test results.
An installed shared/static libR
can be uninstalled by
make prefix=/path/to/here uninstall-libR
Next: Other Options, Previous: Uninstallation, Up: Installing R under Unix-alikes [Contents][Index]
Some platforms can support closely related builds of R which can share all but the executables and dynamic objects. Examples include builds under Linux and Solaris for different CPUs or 32- and 64-bit builds.
R supports the idea of architecture-specific builds, specified by
adding ‘r_arch=name’ to the configure
line. Here
name can be anything non-empty, and is used to name subdirectories
of lib, etc, include and the package libs
subdirectories. Example names from other software are the use of
sparcv9 on Sparc Solaris and 32 by gcc
on
‘x86_64’ Linux.
If you have two or more such builds you can install them over each other (and for 32/64-bit builds on one architecture, one build can be done without ‘r_arch’). The space savings can be considerable: on ‘x86_64’ Linux a basic install (without debugging symbols) took 63Mb, and adding a 32-bit build added 6Mb. If you have installed multiple builds you can select which build to run by
R --arch=name
and just running ‘R’ will run the last build that was installed.
R CMD INSTALL
will detect if more than one build is installed and
try to install packages with the appropriate library objects for each.
This will not be done if the package has an executable configure
script or a src/Makefile file. In such cases you can install for
extra builds by
R --arch=name CMD INSTALL --libs-only pkg1 pkg2 …
If you want to mix sub-architectures compiled on different platforms (for example ‘x86_64’ Linux and ‘i686’ Linux), it is wise to use explicit names for each, and you may also need to set libdir to ensure that they install into the same place.
When sub-architectures are used the version of Rscript
in
e.g. /usr/bin will be the last installed, but
architecture-specific versions will be available in e.g.
/usr/lib64/R/bin/exec${R_ARCH}. Normally all installed
architectures will run on the platform so the architecture of
Rscript
itself does not matter. The executable
Rscript
will run the R
script, and at that time the
setting of the R_ARCH
environment variable determines the
architecture which is run.
When running post-install tests with sub-architectures, use
R --arch=name CMD make check[-devel|all]
to select a sub-architecture to check.
Sub-architectures are also used on Windows, but by selecting executables
within the appropriate bin directory,
R_HOME/bin/i386 or R_HOME/bin/x64. For
backwards compatibility with R < 2.12.0, there are executables
R_HOME/bin/R.exe or R_HOME/bin/Rscript.exe:
these will run an executable from one of the subdirectories, which one
being taken first from the
R_ARCH
environment variable, then from the
--arch command-line option10 and finally from the
installation default (which is 32-bit for a combined 32/64 bit R
installation).
• Multilib: |
Previous: Sub-architectures, Up: Sub-architectures [Contents][Index]
On Linux11, there is an alternative mechanism for mixing 32-bit and 64-bit
libraries known as multilib. If a Linux distribution supports
multilib, then parallel builds of R may be installed in the
sub-directories lib (32-bit) and lib64 (64-bit). The
build to be run may then be selected using the setarch
command. For example, a 32-bit build may be run by
setarch i686 R
The setarch
command is only operational if both 32-bit and
64-bit builds are installed. If there is only one installation of R,
then this will always be run regardless of the architecture specified
by the setarch
command.
There can be problems with installing packages on the non-native
architecture. It is a good idea to run e.g. setarch i686 R
for
sessions in which packages are to be installed, even if that is the only
version of R installed (since this tells the package installation
code the architecture needed).
At present there is a potential problem with packages using Java, as the post-install for a ‘i686’ RPM on ‘x86_64’ Linux reconfigures Java and will find the ‘x86_64’ Java. If you know where a 32-bit Java is installed you may be able to run (as root)
export JAVA_HOME=<path to jre directory of 32-bit Java> setarch i686 R CMD javareconf
to get a suitable setting.
When this mechanism is used, the version of Rscript
in
e.g. /usr/bin will be the last installed, but an
architecture-specific version will be available in
e.g. /usr/lib64/R/bin. Normally all installed architectures
will run on the platform so the architecture of Rscript
does
not matter.
Next: Testing a Unix-alike Installation, Previous: Sub-architectures, Up: Installing R under Unix-alikes [Contents][Index]
There are many other installation options, most of which are listed by
configure --help
. Almost all of those not listed elsewhere in
this manual are either standard autoconf
options not relevant
to R or intended for specialist uses by the R developers.
One that may be useful when working on R itself is the option
--disable-byte-compiled-packages, which ensures that the base
and recommended packages are lazyloaded but not byte-compiled.
(Alternatively the (make or environment) variable
R_NO_BASE_COMPILE
can be set to a non-empty value for the duration
of the build.)
Option --with-internal-tzcode makes use of R’s own code and
copy of the Olson database for managing timezones. This will be
preferred where there are issues with the system implementation, usually
involving times after 2037 or before 1916. An alternative time-zone
directory12 can be used, pointed
to by environment variable TZDIR
: this should contain files such
as Europe/London. On all tested OSes the system timezone was
deduced correctly, but if necessary it can be set as the value of
environment variable TZ
.
Previous: Other Options, Up: Installing R under Unix-alikes [Contents][Index]
Full testing is possible only if the test files have been installed with
make install-tests
which populates a tests directory in the installation.
If this has been done, two testing routes are available.
The first is to move to the home directory of the R installation
(as given by R.home()
) and run
cd tests ## followed by one of ../bin/R CMD make check ../bin/R CMD make check-devel ../bin/R CMD make check-all
and other useful targets are test-BasePackages
and
test-Recommended
to the run tests of the standard and
recommended packages (if installed) respectively.
This re-runs all the tests relevant to the installed R (including for example code in the package vignettes), but not for example the ones checking the example code in the manuals nor making the standalone Rmath library. This can occasionally be useful when the operating environment has been changed, for example by OS updates or by substituting the BLAS (see Shared BLAS).
Parallel checking of packages may be possible: set the environment
variable TEST_MC_CORES
to the maximum number of processes to be
run in parallel. This affects both checking the package examples (part
of make check
) and package sources (part of make
check-devel
and make check-recommended
). It does require a
make
command which supports the make -j n
option: most do but on Solaris you need to select GNU make
or
dmake
. Where parallel checking of package sources is done, a log
file pngname.log is left in the tests
directory for
inspection.
Alternatively, the installed R can be run, preferably with --vanilla. Then
Sys.setenv(LC_COLLATE = "C", LC_TIME = "C", LANGUAGE = "en") library("tools") testInstalledBasic("both") testInstalledPackages(scope = "base") testInstalledPackages(scope = "recommended")
runs the basic tests and then all the tests on the standard and recommended packages. These tests can be run from anywhere: the basic tests write their results in the tests folder of the R home directory and run slightly fewer tests than the first approach: in particular they do not test Internet access.
These tests work best if diff
(in Rtools*.exe for
Windows users) is in the path.
It is possible to test the installed packages (but not the
package-specific tests) by testInstalledPackages
even if
make install-tests
was not run.
Note that the results may depend on the language set for times and messages: for maximal similarity to reference results you may want to try setting (before starting the R session)
LANGUAGE=en
but use a UTF-8 or Latin-1 locale.
Next: Installing R under OS X, Previous: Installing R under Unix-alikes, Up: Top [Contents][Index]
The bin/windows directory of a CRAN site contains binaries for a base distribution and a large number of add-on packages from CRAN to run on Windows XP or later on ix86 CPUs (including AMD64/Intel64 cpus and Windows x64).
Your file system must allow long file names (as is likely except perhaps for some network-mounted systems).
Installation is via the installer R-3.1.1-win.exe. Just double-click on the icon and follow the instructions. When installing on a 64-bit version of Windows the options will include 32- or 64-bit versions of R (and the default is to install both). You can uninstall R from the Control Panel.
Note that you will be asked to choose a language for installation, and that choice applies to both installation and un-installation but not to running R itself.
See the R Windows FAQ for more details on the binary installer.
• Building from source: | ||
• Testing a Windows Installation: |
Next: Testing a Windows Installation, Previous: Installing R under Windows, Up: Installing R under Windows [Contents][Index]
R can be built as either a 32-bit or 64-bit application on Windows: to build the 64-bit application you need a 64-bit edition of Windows: such an OS can also be used to build 32-bit R.
The standard installer combines 32-bit and 64-bit builds into a single executable which can then be installed into the same location and share all the files except the .exe and .dll files and some configuration files in the etc directory.
Building is only tested in a 8-bit locale: using a multi-byte locale (as used for CJK languages) is unsupported and may not work (the scripts do try to select a ‘C’ locale; Windows may not honour this).
Next: Getting the source files, Previous: Building from source, Up: Building from source [Contents][Index]
If you want to build R from the sources, you will first need to collect, install and test an extensive set of tools. See The Windows toolset (and perhaps updates in http://CRAN.R-project.org/bin/windows/Rtools/) for details.
The Rtools*.exe executable installer described in The Windows toolset also includes some source files in addition to the R
source as noted below. You should run it first, to obtain a working
tar
and other necessities. Choose a “Full installation”, and
install the extra files into your intended R source directory, e.g.
C:/R. The directory name should not contain spaces. We
will call this directory R_HOME below.
Next: Building the core files, Previous: Getting the tools, Up: Building from source [Contents][Index]
You need to collect the following sets of files:
tar -xf R-3.1.1.tar.gz
to create the source tree in R_HOME. Beware: do use
tar
to extract the sources rather than tools such as WinZip.
If you are using an account with administrative privileges you may get a
lot of messages which can be suppressed by
tar --no-same-owner -xf R-3.1.1.tar.gz
or perhaps better, set the environment variable TAR_OPTIONS
to the
value ‘--no-same-owner --no-same-permissions’.
It is also possible to obtain the source code using Subversion; see Obtaining R for details.
make
link-recommended
. If you have an Internet connection, you can do this
automatically by running in R_HOME/src/gnuwin32
make rsync-recommended
The following additional items are normally installed by Rtools31.exe. If instead you choose to do a completely manual build you will also need
libpng
, jpeg
and libtiff
sources
(available, e.g., from http://www.libpng.org/,
http://www.ijg.org and
http://download.osgeo.org/libtiff/); current versions are
recommended and jpeg
7 or later is required. It is also possible
to use ‘libjpeg-turbo’ from
http://sourceforge.net/projects/libjpeg-turbo/files/.
Working in the directory R_HOME/src/gnuwin32/bitmap,
install the libpng
and jpeg
sources in sub-directories.
The jpeg
sub-directory for version 9 is named jpeg-9; if
you use a different version (e.g. jpeg-9a or
libjpeg-turbo), copy file src/gnuwin32/MkRules.dist to
src/gnuwin32/MkRules.local and edit the definition of
JPEGDIR
: the names of the libpng and libtiff
directories can also be set there.
Example:
> tar -zxf libpng-1.6.10.tar.gz > mv libpng-1.6.10 libpng > tar -zxf jpegsrc.v9a.tar.gz > tar -zxf tiff-4.0.3.tar.gz > mv tiff-4.0.3/libtiff . > rm -rf tiff-4.0.3
(and see the comment above about --no-same-owner).
Next: Building the bitmap files, Previous: Getting the source files, Up: Building from source [Contents][Index]
Set the environment variable TMPDIR
to the absolute path to a
writable directory, with a path specified with forward slashes and no
spaces. (The default is /tmp, which may not be useful on
Windows.)
You may need to compile under a case-honouring file system: we found
that a samba
-mounted file system (which maps all file names to
lower case) did not work.
Open a command window at R_HOME/src/gnuwin32. Look at MkRules.dist and if settings need to be altered, copy it to MkRules.local and edit the settings there. In particular, this is where a 64-bit build is selected. Then run
make all recommended
and sit back and wait while the basic compile takes place.
Notes:
malloc
in the file
R_HOME/src/gnuwin32/malloc.c is used for R’s internal
memory allocations. You can opt out of this by setting
LEA_MALLOC=NO
in MkRules.dist, in which case the malloc
in msvcrt.dll is used. This does impose a considerable
performance penalty and has not been tested recently.
make -j4 all make -j4 recommended
but this is only likely to be worthwhile on a multi-core machine with ample memory, and is not 100% reliable.
R_NO_BASE_COMPILE
to a non-empty
value, which inhibits the byte-compilation of the base and recommended
packages.
Next: Building the cairo devices files, Previous: Building the core files, Up: Building from source [Contents][Index]
The file R_HOME/library/grDevices/libs/{i386,x64}Rbitmap.dll is not built automatically.
Running make
in R_HOME/src/gnuwin32/bitmap or
make bitmapdll
in R_HOME/src/gnuwin32 should build
Rbitmap.dll and install it under
R_HOME/library/grDevices/libs.
Next: Checking the build, Previous: Building the bitmap files, Up: Building from source [Contents][Index]
The devices based on cairographics (svg
, cairo_pdf
,
cairo_ps
and the type = "cairo"
versions of png
,
jpeg
, tiff
and bmp
) are implemented in a separate
DLL winCairo.dll which is loaded when one of these devices is
first used. It is not built by default, and needs to be built after
Rbitmap.dll, by make cairodevices
.
To enable the building of these devices you need to install the static cairographics libraries built by Simon Urbanek at http://www.rforge.net/Cairo/files/cairo-current-win.tar.gz. Set the macro ‘CAIRO_HOME’ in MkRules.local. (Note that this tarball unpacks with a top-level directory src/: ‘CAIRO_HOME’ needs to include that directory in its path.)
• Using ICU for collation: |
Previous: Building the cairo devices files, Up: Building the cairo devices files [Contents][Index]
It is possible (and even recommended) to build R to use ICU (International Components for Unicode, http://site.icu-project.org/) for collation, as is commonly done on Unix-alikes.
Two settings are needed in MkRules.local,
# set to use ICU # USE_ICU = YES # path to parent of ICU headers ICU_PATH = /path/to/ICU
The first should be uncommented and the second set to the top-level
directory of a suitably packaged binary build of ICU, for example that
at http://www.stats.ox.ac.uk/pub/Rtools/goodies/ICU_531.zip.
Depending on the build, it may be necessary to edit the macro
ICU_LIBS
.
Next: Building the manuals, Previous: Building the cairo devices files, Up: Building from source [Contents][Index]
You can test a build by running
make check
The recommended packages can be checked by
make check-recommended
Other levels of checking are
make check-devel
for a more thorough check of the R functionality, and
make check-all
for check-devel
and check-recommended
.
If a test fails, there will almost always be a .Rout.fail file in the directory being checked (often tests/Examples or tests): examine the file to help pinpoint the problem.
Parallel checking of package sources (part of make check-devel
and make check-recommended
) is possible: see the environment
variable TEST_MC_CORES
to the maximum number of processes to be
run in parallel.
Next: Building the Inno Setup installer, Previous: Checking the build, Up: Building from source [Contents][Index]
The PDF manuals can be made by
make manuals
If you want to make the info versions (not including the Reference Manual), use
cd ../../doc/manual make -f Makefile.win info
(all assuming you have pdftex
/pdflatex
installed and
in your path).
See the Making the manuals section in the Unix-alike section for setting options such as the paper size and the fonts used.
Version 4.x of makeinfo
from Rtools is assumed by default. If
you have version 5.x of texinfo, makeinfo
has been
replaced by a Perl
script texi2any
: file
MkRules.dist contains alternative macros to allow that to be used
(copy it to MkRules.local before editing). (A package of
texinfo 5.x for use on Windows is available at
http://www.stats.ox.ac.uk/pub/Rtools/: you will also need to
install Perl
.)
Next: Building the MSI installer, Previous: Building the manuals, Up: Building from source [Contents][Index]
You need to have the files for a complete R build, including bitmap and Tcl/Tk support and the manuals, as well as the recommended packages and Inno Setup (see The Inno Setup installer).
Once everything is set up
make distribution make check-all
will make all the pieces and the installer and put them in the gnuwin32/cran subdirectory, then check the build. This works by building all the parts in the sequence:
rbuild (the executables, the FAQ docs etc.) rpackages (the base packages) htmldocs (the HTML documentation) bitmapdll (the bitmap support files) cairodevices (the cairo-based graphics devices) recommended (the recommended packages) vignettes (the vignettes in base packages: only needed if building from an svn checkout) manuals (the PDF manuals) rinstaller (the install program) crandir (the CRAN distribution directory, only for 64-bit builds)
The parts can be made individually if a full build is not needed, but
earlier parts must be built before later ones. (The Makefile
doesn’t enforce this dependency—some build targets force a lot of
computation even if all files are up to date.) The first four targets
are the default build if just make
(or make all
) is
run.
Parallel make is not supported and likely to fail.
If you want to customize the installation by adding extra packages,
replace make rinstaller
by something like
make rinstaller EXTRA_PKGS='pkg1 pkg2 pkg3'
An alternative way to customize the installer starting with a binary distribution is to first make an installation of R from the standard installer, then add packages and make other customizations to that installation. Then (after having customized file MkRules, possibly via MkRules.local, and having made R in the source tree) in src/gnuwin32/installer run
make myR IMAGEDIR=rootdir
where rootdir is the path to the root of the customized installation (in double quotes if it contains spaces or backslashes).
Both methods create an executable with a standard name such as R-3.1.1-win.exe, so please rename it to indicate that it is customized. If you intend to distribute a customized installer please do check that license requirements are met – note that the installer will state that the contents are distributed under GPL-2 and this has a requirement for you to supply the complete sources (including the R sources even if you started with a binary distribution of R, and also the sources of any extra packages (including their external software) which are included).
The defaults for the startup parameters may also be customized. For example
make myR IMAGEDIR=rootdir MDISDI=1
will create an installer that defaults to installing R to run in SDI mode. See src/gnuwin32/installer/Makefile for the names and values that can be set.
The standard CRAN distribution of a 32/64-bit installer is made by first building 32-bit R (just
make 32-bit
is needed), and then building 64-bit R with the macro HOME32
set
in file MkRules.local to the top-level directory of the 32-bit
build. Then the make rinstaller
step copies the files that
differ between architectures from the 32-bit build as it builds the
installer image.
Next: 64-bit Windows builds, Previous: Building the Inno Setup installer, Up: Building from source [Contents][Index]
It is also possible to build an installer for use with Microsoft Installer. This is intended for use by sysadmins doing automated installs, and is not recommended for casual use.
It makes use of the Windows Installer XML (WiX) toolkit version 3.5 (or perhaps later, untested) available from http://wix.sourceforge.net/ or http://wixtoolset.org/. Once WiX is installed, set the path to its home directory in MkRules.local.
You need to have the files for a complete R build, including bitmap and Tcl/Tk support and the manuals, as well as the recommended packages. There is no option in the installer to customize startup options, so edit etc/Rconsole and etc/Rprofile.site to set these as required. Then
cd installer make msi
which will result in a file with a name like
R-3.1.1-win32.msi. This can be double-clicked to be
installed, but those who need it will know what to do with it (usually
by running msiexec /i
with additional options). Properties
that users might want to set from the msiexec
command line
include ‘ALLUSERS’, ‘INSTALLDIR’ (something like
c:\Program Files\R\R-3.1.1) and ‘RMENU’ (the path
to the ‘R’ folder on the start menu) and ‘STARTDIR’ (the
starting directory for R shortcuts, defaulting to something like
c:\Users\name\Documents\R).
The MSI installer can be built both from a 32-bit build of R
(R-3.1.1-win32.msi) and from a 64-bit build of R
(R-3.1.1-win64.msi, optionally including 32-bit files
by setting the macro HOME32
, when the name is
R-3.1.1-win.msi). Unlike the main installer, a 64-bit
MSI installer can only be run on 64-bit Windows.
Thanks to David del Campo (Dept of Statistics, University of Oxford) for suggesting WiX and building a prototype installer.
Previous: Building the MSI installer, Up: Building from source [Contents][Index]
To build a 64-bit version of R you need a 64-bit toolchain: the only one discussed here is based on the work of the MinGW-w64 project (http://sourceforge.net/projects/mingw-w64/, but commercial compilers such as those from Intel and PGI could be used (and have been by R redistributors).
Support for MinGW-w64 was developed in the R sources over the period 2008–10 and was first released as part of R 2.11.0. The assistance of Yu Gong at a crucial step in porting R to MinGW-w64 is gratefully acknowledged, as well as help from Kai Tietz, the lead developer of the MinGW-w64 project.
Windows 64-bit is now completely integrated into the R and package build systems.
Previous: Building from source, Up: Installing R under Windows [Contents][Index]
The Windows installer contains a set of test files used when building R.
The Rtools
are not needed to run these tests. but more
comprehensive analysis of errors will be given if diff
is in
the path (and errorsAreFatal = FALSE
is then not needed below).
Launch either Rgui
or Rterm
, preferably with
--vanilla. Then run
Sys.setenv(LC_COLLATE = "C", LANGUAGE = "en") library("tools") testInstalledBasic("both") testInstalledPackages(scope = "base", errorsAreFatal = FALSE) testInstalledPackages(scope = "recommended", errorsAreFatal = FALSE)
runs the basic tests and then all the tests on the standard and
recommended packages. These tests can be run from anywhere: they write
some of their results in the tests folder of the R home
directory (as given by R.home()
), and hence may need to be run
under the account used to install R.
The results of example(md5sums)
when testing tools will
differ from the reference output as some files are installed with
Windows’ CRLF line endings.
Next: Running R, Previous: Installing R under Windows, Up: Top [Contents][Index]
The front page of a CRAN site has a link ‘Download R for OS X’. Click on that, then download the file R-3.1.1-snowleopard.pkg and install it. This runs on OS X 10.6 and later (Snow Leopard, Lion, Mountain Lion, Mavericks, …); it is a 64-bit (‘x86_64’) build which should run on all Macs from mid-2008 on. For older Intel Macs and some older versions of the OS you can install R from the sources.
There is a separate installer package, R-3.1.1-mavericks.pkg, for use on Mavericks only: the ‘Snow Leopard’ installer package also works there and may have more binary packages available (but there are a few packages using C++11 and only available for the Mavericks build).
It is important that if you use a binary installer package that your OS is fully updated: run ‘Software Update’ from the Apple menu to be sure. (If using XQuartz, check that is current.)
To install, just double-click on the icon of the file you downloaded. At the ‘Installation Type’ stage, note the option to ‘Customize’. This currently shows three components. Everyone will need the ‘R Framework’ component: the ‘R GUI’ and ‘Tcl/Tk’ components are optional (the latter being needed to use package tcltk).
This is an Apple Installer package. If you encounter any problem during the installation, please check the Installer log by clicking on the “Window” menu and item “Installer Log”. The full output (select “Show All Log”) is useful for tracking down problems.
If you update your OS X version, you should re-install R: the installer tailors the installation to the current version of the OS.
For building R from source, see OS X.
• Running R under OS X: | ||
• Uninstalling under OS X: | ||
• Multiple versions: |
Next: Uninstalling under OS X, Previous: Installing R under OS X, Up: Installing R under OS X [Contents][Index]
There are two ways to run R on OS X from a CRAN binary distribution.
There is a GUI console normally installed with the R icon in /Applications which you can run by double-clicking (e.g. from Launchpad or Finder). This is usually referred to as R.APP to distinguish it from command-line R: its user manual is currently part of the OS X FAQ at http://cran.r-project.org/bin/macosx/RMacOSX-FAQ.html and can be viewed from R.APP’s ‘Help’ menu.
You can run command-line R from a Terminal like any other Unix-alike: see the next chapter of this manual. There are some small differences which may surprise users of R on other platforms, notably the default personal library directory (under ~/Library/R, e.g. ~/Library/R/3.1/library), and that warnings, messages and other output to stderr are highlighted in bold.
Users of R.APP under Mavericks need to be aware of its ‘App Nap’ feature (https://developer.apple.com/library/mac/releasenotes/MacOSX/WhatsNewInOSX/Articles/MacOSX10_9.html) which can cause R tasks to appear to run very slowly when not producing output in the console. Here are three ways to avoid it:
defaults write org.R-project.R NSAppSleepDisabled -bool YES
(see https://developer.apple.com/library/mac/releasenotes/MacOSX/WhatsNewInOSX/Articles/MacOSX10_9.html).
Next: Multiple versions, Previous: Running R under OS X, Up: Installing R under OS X [Contents][Index]
R for OS X consists of two parts: the GUI (R.APP) and the R framework. The un-installation is as simple as removing those folders (e.g. by dragging them into the Trash). The typical installation will install the GUI into the /Applications/R.app folder and the R framework into the /Library/Frameworks/R.framework folder. This does leave some links in /usr/bin.
If you want to get rid of R more completely using a Terminal, simply
run (prepend sudo
if needed):
rm -rf /Library/Frameworks/R.framework /Applications/R.app \ /usr/bin/R /usr/bin/Rscript
The installation consisted of three Apple packages:
org.r-project.R.x86_64.fw.pkg
,
org.r-project.R.x86_64.GUI.pkg
and
org.r-project.x86_64.tcltk.x11
(not all of which need be
installed). You can use pkgutil --unlink
(not supported by Lion
or later) to remove their files or pkgutil --forget
if you want
the Apple Installer to forget about the package without deleting its
files (useful for the R framework when installing multiple R versions
in parallel), or after you have deleted the files.
Uninstalling the Tcl/Tk component (which is installed under /usr/local) is not simple. You can list the files it installed in a Terminal by
pkgutil --files org.r-project.x86_64.tcltk.x11
These are paths relative to /, the root of the file system.
Previous: Uninstalling under OS X, Up: Installing R under OS X [Contents][Index]
The installer will remove any previous version of the R framework
which it finds installed. This can be avoided by using pkgutil
--forget
(see the previous section). However, note that different
versions are installed under
/Library/Frameworks/R.framework/Versions as 3.0,
3.1 and so on, so it is not possible to have different
‘3.x.y’ versions installed for the same ‘x’.
A version of R can be run directly from the command-line as e.g.
/Library/Frameworks/R.framework/Versions/3.1/Resources/bin/R
However, R.APP will always run the ‘current’ version, that is the last
installed version. A small utility, Rswitch.app
(available at
http://r.research.att.com/#other), can be used to change the
‘current’ version. However, this is of limited use as R.APP is
compiled against a particular version of R and will likely crash if
switched to an earlier version. This may allow you to install a
development version of R (de-selecting R.APP) and then switch back
to the release version.
Next: Add-on packages, Previous: Installing R under OS X, Up: Top [Contents][Index]
How to start R and what command-line options are available is discussed in Invoking R in An Introduction to R.
You should ensure that the shell has set adequate resource limits: R
expects a stack size of at least 8MB and to be able to open at least 256
file descriptors. (Any modern OS will have default limits at least as
large as these, but apparently NetBSD does not. Use the shell command
ulimit
(sh
/bash
) or limit
(csh
/tcsh
) to check.)
R makes use of a number of environment variables, the default values
of many of which are set in file R_HOME/etc/Renviron (there
are none set by default on Windows and hence no such file). These are
set at configure
time, and you would not normally want to
change them – a possible exception is R_PAPERSIZE
(see Setting paper size). The paper size will be deduced from the ‘LC_PAPER’
locale category if it exists and R_PAPERSIZE
is unset, and this
will normally produce the right choice from ‘a4’ and ‘letter’
on modern Unix-alikes (but can always be overridden by setting
R_PAPERSIZE
).
Various environment variables can be set to determine where R creates
its per-session temporary directory. The environment variables
TMPDIR
, TMP
and TEMP
are searched in turn and the
first one which is set and points to a writable area is used. If none
do, the final default is /tmp on Unix-alikes and the value of
R_USER
on Windows. The path should be an absolute path not
containing spaces (and it is best to avoid non-alphanumeric characters
such as +
).
Some Unix-alike systems are set up to remove files and directories
periodically from /tmp, for example by a cron
job
running tmpwatch
. Set TMPDIR
to another directory
before starting long-running jobs on such a system.
Note that TMPDIR
will be used to execute configure
scripts when installing packages, so if /tmp has been mounted as
‘noexec’, TMPDIR
needs to be set to a directory from which
execution is allowed.
Next: Internationalization, Previous: Running R, Up: Top [Contents][Index]
• Default packages: | ||
• Managing libraries: | ||
• Installing packages: | ||
• Updating packages: | ||
• Removing packages: | ||
• Setting up a package repository: | ||
• Checking installed source packages: |
It is helpful to use the correct terminology. A package is
loaded from a library by the function library()
. Thus a
library is a directory containing installed packages; the main library
is R_HOME/library, but others can be used, for example by
setting the environment variable R_LIBS
or using the R function
.libPaths()
.
Next: Managing libraries, Previous: Add-on packages, Up: Add-on packages [Contents][Index]
The set of packages loaded on startup is by default
> getOption("defaultPackages") [1] "datasets" "utils" "grDevices" "graphics" "stats" "methods"
(plus, of course, base) and this can be changed by setting the
option in startup code (e.g. in ~/.Rprofile). It is initially
set to the value of the environment variable R_DEFAULT_PACKAGES
if
set (as a comma-separated list). Setting R_DEFAULT_PACKAGES=NULL
ensures that only package base is loaded.
Changing the set of default packages is normally used to reduce the set
for speed when scripting: in particular not using methods will
reduce the start-up time by a factor of up to two (and this is done by
Rscript
). But it can also be used to customize R, e.g.
for class use.
Next: Installing packages, Previous: Default packages, Up: Add-on packages [Contents][Index]
R packages are installed into libraries, which are directories in the file system containing a subdirectory for each package installed there.
R comes with a single library, R_HOME/library which is the value of the R object ‘.Library’ containing the standard and recommended13 packages. Both sites and users can create others and make use of them (or not) in an R session. At the lowest level ‘.libPaths()’ can be used to add paths to the collection of libraries or to report the current collection.
R will automatically make use of a site-specific library
R_HOME/site-library if this exists (it does not in a
vanilla R installation). This location can be overridden by
setting14 ‘.Library.site’ in
R_HOME/etc/Rprofile.site, or (not recommended) by setting
the
environment variable R_LIBS_SITE
. Like ‘.Library’, the
site libraries are always included by ‘.libPaths()’.
Users can have one or more libraries, normally specified by the
environment variable R_LIBS_USER
. This has a default value (to
see it, use ‘Sys.getenv("R_LIBS_USER")’ within an R session),
but that is only used if the corresponding directory actually exists
(which by default it will not).
Both R_LIBS_USER
and R_LIBS_SITE
can specify multiple
library paths, separated by colons (semicolons on Windows).
Next: Updating packages, Previous: Managing libraries, Up: Add-on packages [Contents][Index]
• Windows packages: | ||
• OS X packages: | ||
• Customizing package compilation: | ||
• Multiple sub-architectures: | ||
• Byte-compilation: |
Packages may be distributed in source form or compiled binary form. Installing source packages which contain C/C++/Fortran code requires that compilers and related tools be installed. Binary packages are platform-specific and generally need no special tools to install, but see the documentation for your platform for details.
Note that you may need to specify implicitly or explicitly the library to which the package is to be installed. This is only an issue if you have more than one library, of course.
Ensure that the environment variable TMPDIR
is either unset (and
/tmp exists and can be written in and executed from) or is the
absolute path to a valid temporary directory, not containing spaces.
For most users it suffices to call ‘install.packages(pkgname)’ or its GUI equivalent if the intention is to install a CRAN package and internet access is available.15 On most systems ‘install.packages()’ will allow packages to be selected from a list box (typically with several thousand items).
To install packages from source on a Unix-alike use
R CMD INSTALL -l /path/to/library pkg1 pkg2 …
The part ‘-l /path/to/library’ can be omitted, in which case the
first library of a normal R session is used (that shown by
.libPaths()[1]
).
There are a number of options available: use R CMD INSTALL --help
to see the current list.
Alternatively, packages can be downloaded and installed from within
R. First set the option CRAN
to your nearest CRAN
mirror using chooseCRANmirror()
. Then download
and install packages pkg1 and pkg2 by
> install.packages(c("pkg1", "pkg2"))
The essential dependencies of the specified packages will also be fetched.
Unless the library is specified (argument lib
) the first library
in the library search path is used: if this is not writable, R will
ask the user (in an interactive session) if the default personal library
should be created, and if allowed to will install the packages there.
If you want to fetch a package and all those it depends on (in any way) that are not already installed, use e.g.
> install.packages("Rcmdr", dependencies = TRUE)
install.packages
can install a source package from a local
.tar.gz file by setting argument repos
to NULL
:
this will be selected automatically if the name given is a single
.tar.gz file.
install.packages
can look in several repositories, specified as a
character vector by the argument repos
: these can include a
CRAN mirror, Bioconductor, Omegahat, R-forge, rforge.net,
local archives, local files, …). Function
setRepositories()
can select amongst those repositories that the
R installation is aware of.
Naive users sometimes forget that as well as installing a package, they
have to use library
to make its functionality available.
Next: OS X packages, Previous: Installing packages, Up: Installing packages [Contents][Index]
What install.packages
does by default is different on Unix-alikes
(except OS X) and Windows. On Unix-alikes it consults the list of
available source packages on CRAN (or other
repository/ies), downloads the latest version of the package sources,
and installs them (via R CMD INSTALL
). On Windows it looks (by
default) at the list of binary versions of packages available for
your version of R and downloads the latest versions (if any),
although optionally it will also download and install a source package
by setting the type
argument.
On Windows install.packages
can also install a binary package
from a local zip file by setting argument repos
to
NULL
. Rgui.exe
has a menu Packages
with a GUI
interface to install.packages
, update.packages
and
library
.
Windows binary packages for R are distributed as a single binary containing either or both architectures.
A few of the binary packages need other software to be installed on your system: see for example http://CRAN.R-project.org/bin/windows/contrib/3.1/@ReadMe. For 64-bit builds, packages using Gtk+ (Cairo, RGtk2, cairoDevice and those that depend on them) need the bin directory of a bundled distribution from http://www.gtk.org/download-windows-64bit.html in the path: it should work to have both 32- and 64-bit Gtk+ bin directories in the path on a 64-bit version of R.
R CMD INSTALL
works in Windows to install source packages. No
additional tools are needed if the package does not contain compiled
code, and install.packages(type="source")
will work for such
packages (and for those with compiled code if the tools (see The Windows toolset) are in the path). We have seen occasional permission
problems after unpacking source packages on some Vista/Windows 7/Server
2008 systems: these have been circumvented by setting the environment
variable R_INSTALL_TAR
to ‘tar.exe’.
If you have only a source package that is known to work with current R and just want a binary Windows build of it, you could make use of the building service offered at http://win-builder.r-project.org/.
For almost all packages R CMD INSTALL
will attempt to install
both 32- and 64-bit builds of a package if run from a 32/64-bit install
of R. It will report success if the installation of the architecture
of the running R
succeeded, whether or not the other
architecture was successfully installed. The exceptions are packages
with a non-empty configure.win script or which make use of
src/Makefile.win. If configure.win does something
appropriate to both architectures use16 option
--force-biarch: otherwise R CMD INSTALL
--merge-multiarch
can be applied to a source tarball to merge separate
32- and 64-bit installs. (This can only be applied to a tarball, and
will only succeed if both installs succeed.)
If you have a package without compiled code and no Windows-specific help, you can zip up an installation on another OS and install from the that zip file on Windows. However, such a package can be installed from the sources on Windows without any additional tools.
There is provision to make use of a system-wide library of installed
external software by setting the make
variable
LOCAL_SOFT
, to give an equivalent of /usr/local on a
Unix-alike. This can be set in src/gnuwin/MkRules.local when
R is built from sources (see the comments in
src/gnuwin/MkRules.dist), or in file17 etc/i386/Makeconf or etc/x64/Makeconf for an
installed version of R. The version used by CRAN can be
downloaded from http://www.stats.ox.ac.uk/pub/Rtools/libs.html.
Next: Customizing package compilation, Previous: Windows packages, Up: Installing packages [Contents][Index]
On OS X install.packages
works as it does on other Unix-alike
systems, but there is an additional type mac.binary
(the default
in the CRAN distribution but not when compiling from source:
mac.binary.mavericks
for a Mavericks-only build) which can be
passed to install.packages
in order to download and install
binary packages from a suitable repository. These OS X binary package
files have the extension ‘.tgz’. The R.APP GUI provides menus
for installation of either binary or source packages, from
CRAN or local files.
Note that most binary packages including compiled code are tied to a particular series (e.g. R 3.0.x or 3.1.x) of R.
Installing source packages which do not contain compiled code should
work with no additional tools. For others you will need the
‘Command-line Tools’ for Xcode
and compilers which match those
used to build R: see OS X. (Note that the Fortran compilers
differ for the ‘Snow Leopard’ and ‘Mavericks’ binary installations of
R.)
Package rJava and those which depend on it need a Java runtime installed and several packages need X11 installed, including those using Tk. For Mountain Lion and Mavericks see OS X and Java (OS X).
Tcl/Tk extensions BWidget
and Tktable
are part of the
Tcl/Tk contained in the R installer. These are required by a number
of CRAN and Bioconductor packages.
A few of the binary packages need other software to be installed on your system. In particular packages using Gtk+ (RGtk2, cairoDevice and those that depend on them) need the GTK framework installed from http://r.research.att.com/libs/: the appropriate version at the time of writing was http://r.research.att.com/libs/GTK_2.24.17-X11.pkg
The default compilers specified in /Library/Frameworks/R.framework/Resources/etc/Makeconf depend on the version of OS X under which R was installed, and are appropriate to the latest version of the Xcode command-line tools for that version of OS X. The settings can be changed, either by editing that file or in a file such as ~/.R/Makevars (see the next section). Entries which may need to be changed include ‘CC’, ‘CXX’, ‘FC’, ‘F77’, ‘FLIBS’ and the corresponding flags, and perhaps ‘CXXCPP’, ‘DYLIB_LD’, ‘MAIN_LD’, ‘SHLIB_CXXLD’, ‘SHLIB_FCLD’ and ‘SHLIB_LD’.
So for example you could select clang
for both C and C++ with
extensive checking by having in ~/.R/Makevars
CC=clang CXX=clang++ CFLAGS=-mtune=native -g -O2 -Wall -pedantic -Wconversion CXXFLAGS=-mtune=native -g -O2 -Wall -pedantic -Wconversion
and for another version of gfortran-4.2
we needed
FLIBS=-lgfortran
Next: Multiple sub-architectures, Previous: OS X packages, Up: Installing packages [Contents][Index]
The R system and package-specific compilation flags can be overridden or
added to by setting the appropriate Make variables in the personal file
HOME/.R/Makevars-R_PLATFORM (but
HOME/.R/Makevars.win or HOME/.R/Makevars.win64
on Windows), or if that does not exist, HOME/.R/Makevars,
where ‘R_PLATFORM’ is the platform for which R was built, as
available in the platform
component of the R variable
R.version
. An alternative personal file can be specified
via the environment variable R_MAKEVARS_USER
.
Package developers are encouraged to use this mechanism to enable a reasonable amount of diagnostic messaging (“warnings”) when compiling, such as e.g. -Wall -pedantic for tools from GCC, the Gnu Compiler Collection.
Note that this mechanism can also be used when it necessary to change the optimization level for a particular package. For example
## for C code CFLAGS=-g -O -mtune=native ## for C++ code CXXFLAGS=-g -O -mtune=native ## for Fortran code FFLAGS=-g -O -mtune=native ## for Fortran 9x code FCFLAGS=-g -O -mtune=native
There is also provision for a site-wide Makevars.site file under
R_HOME/etc (in a sub-architecture-specific directory if
appropriate). This is read immediately after Makeconf, and an
alternative file can be specified by environment variable
R_MAKEVARS_SITE
.
Next: Byte-compilation, Previous: Customizing package compilation, Up: Installing packages [Contents][Index]
When installing packages from their sources, there are some extra considerations on installations which use sub-architectures. These are commonly used on Windows but can in principle be used on other platforms.
When a source package is installed by a build of R which supports multiple sub-architectures, the normal installation process installs the packages for all sub-architectures. The exceptions are
where there is an configure script, or a file src/Makefile.
where there is a non-empty configure.win script, or a file src/Makefile.win (with some exceptions where the package is known to have an architecture-independent configure.win, or if --force-biarch or a field in the DESCRIPTION file is used to assert so).
In those cases only the current architecture is installed. Further sub-architectures can be installed by
R CMD INSTALL --libs-only pkg
using the path to R
or R --arch
to select the
additional sub-architecture. There is also R CMD INSTALL
--merge-multiarch
to build and merge the two architectures, starting
with a source tarball.
Previous: Multiple sub-architectures, Up: Installing packages [Contents][Index]
The base and recommended packages are byte-compiled by default. Other
packages can be byte-compiled on installation by using R CMD
INSTALL
with option --byte-compile or by
install.packages(type = "source", INSTALL_opts =
"--byte-compile")
.
Not all contributed packages work correctly when byte-compiled (for example because they interfere with the sealing of namespaces). For most packages (especially those which make extensive use of compiled code) the speed-up is small. Unless a package is used frequently the time spent in byte-compilation can outweigh the time saved in execution: also byte-compilation can add substantially to the installed size of the package.
Byte-compilation can be controlled on a per-package basis by the ‘ByteCompile’ field in the DESCRIPTION file.
Next: Removing packages, Previous: Installing packages, Up: Add-on packages [Contents][Index]
The command update.packages()
is the simplest way to ensure that
all the packages on your system are up to date. It downloads the list
of available packages and their current versions, compares it with those
installed and offers to fetch and install any that have later versions
on the repositories.
An alternative interface to keeping packages up-to-date is provided by
the command packageStatus()
, which returns an object with
information on all installed packages and packages available at multiple
repositories. The print
and summary
methods give an
overview of installed and available packages, the upgrade
method
offers to fetch and install the latest versions of outdated packages.
One sometimes-useful additional piece of information that
packageStatus()
returns is the status of a package, as
"ok"
, "upgrade"
or "unavailable"
(in the currently
selected repositories). For example
> inst <- packageStatus()$inst > inst[inst$Status != "ok", c("Package", "Version", "Status")] Package Version Status Biobase Biobase 2.8.0 unavailable RCurl RCurl 1.4-2 upgrade Rgraphviz Rgraphviz 1.26.0 unavailable rgdal rgdal 0.6-27 upgrade
Next: Setting up a package repository, Previous: Updating packages, Up: Add-on packages [Contents][Index]
Packages can be removed in a number of ways. From a command prompt they can be removed by
R CMD REMOVE -l /path/to/library pkg1 pkg2 …
From a running R process they can be removed by
> remove.packages(c("pkg1", "pkg2"), lib = file.path("path", "to", "library"))
Finally, in most installations one can just remove the package directory from the library.
Next: Checking installed source packages, Previous: Removing packages, Up: Add-on packages [Contents][Index]
Utilities such as install.packages
can be pointed at any
CRAN-style repository, and R users may want to set up their
own. The ‘base’ of a repository is a URL such as
http://www.omegahat.org/R/: this must be an URL scheme that
download.packages
supports (which also includes ‘ftp://’ and
‘file://’, but not on most systems ‘https://’). Under that
base URL there should be directory trees for one or more of the
following types of package distributions:
"source"
: located at src/contrib and containing
.tar.gz files. Other forms of compression can be used, e.g.
.tar.bz2 or .tar.xz files. Complete repositories contain
the sources corresponding to any binary packages, and in any case it is
wise to have a src/contrib area with a possibly empty
PACKAGES file.
"win.binary"
: located at bin/windows/contrib/x.y for
R versions x.y.z and containing .zip files for Windows.
"mac.binary"
: located at
bin/macosx/contrib/3.y for R versions
3.y.z and containing .tgz files.
"mac.binary.mavericks"
: located at
bin/macosx/mavericks/contrib/3.y for R versions
3.1.z to be run under OS X 10.9 (Mavericks) and containing
.tgz files.
"mac.binary.leopard"
: located at
bin/macosx/leopard/contrib/2.y for R versions
2.y.z and containing .tgz files.
Each terminal directory must also contain a PACKAGES file. This
can be a concatenation of the DESCRIPTION files of the packages
separated by blank lines, but only a few of the fields are needed. The
simplest way to set up such a file is to use function
write_PACKAGES
in the tools package, and its help explains
which fields are needed. Optionally there can also be a
PACKAGES.gz file, a gzip
-compressed version of
PACKAGES—as this will be downloaded in preference to
PACKAGES it should be included for large repositories. (If you
have a mis-configured server that does not report correctly non-existent
files you may need PACKAGES.gz.)
To add your repository to the list offered by setRepositories()
,
see the help file for that function.
Incomplete repositories are better specified via a
contriburl
argument than via being set as a repository.
A repository can contain subdirectories, when the descriptions in the PACKAGES file of packages in subdirectories must include a line of the form
Path: path/to/subdirectory
—once again write_PACKAGES
is the simplest way to set this up.
Previous: Setting up a package repository, Up: Add-on packages [Contents][Index]
It can be convenient to run R CMD check
on an installed
package, particularly on a platform which uses sub-architectures. The
outline of how to do this is, with the source package in directory
pkg (or a tarball filename):
R CMD INSTALL -l libdir pkg > pkg.log 2>&1 R CMD check -l libdir --install=check:pkg.log pkg
Where sub-architectures are in use the R CMD check
line can be
repeated with additional architectures by
R --arch arch CMD check -l libdir --extra-arch --install=check:pkg.log pkg
where --extra-arch selects only those checks which depend on
the installed code and not those which analyse the sources. (If
multiple sub-architectures fail only because they need different
settings, e.g. environment variables, --no-multiarch may need
to be added to the INSTALL
lines.) On Unix-alikes the
architecture to run is selected by --arch: this can also be
used on Windows with R_HOME/bin/R.exe, but it is more usual
to select the path to the Rcmd.exe
of the desired
architecture.
So on Windows to install, check and package for distribution a source package from a tarball which has been tested on another platform one might use
.../bin/i386/Rcmd INSTALL -l libdir tarball --build > pkg.log 2>&1 .../bin/i386/Rcmd check -l libdir --extra-arch --install=check:pkg.log pkg .../bin/x64/Rcmd check -l libdir --extra-arch --install=check:pkg.log pkg
where one might want to run the second and third lines in a different shell with different settings for environment variables and the path (to find external software, notably for Gtk+).
R CMD INSTALL
can do a i386
install and then add the
x64
DLL from a single command by
R CMD INSTALL --merge-multiarch -l libdir tarball
and --build can be added to zip up the installation.
Next: Choosing between 32- and 64-bit builds, Previous: Add-on packages, Up: Top [Contents][Index]
Internationalization refers to the process of enabling support for many human languages, and localization to adapting to a specific country and language.
Current builds of R support all the character sets that the
underlying OS can handle. These are interpreted according to the
current locale
, a sufficiently complicated topic to merit a
separate section. Note though that R has no built-in support for
right-to-left languages and bidirectional output, relying on the OS
services. For example, how character vectors in UTF-8 containing both
English digits and Hebrew characters are printed is OS-dependent (and
perhaps locale-dependent).
The other aspect of the internationalization is support for the translation of messages. This is enabled in almost all builds of R.
• Locales: | ||
• Localization of messages: |
Next: Localization of messages, Previous: Internationalization, Up: Internationalization [Contents][Index]
A locale is a description of the local environment of the user,
including the preferred language, the encoding of characters, the
currency used and its conventions, and so on. Aspects of the locale are
accessed by the R functions Sys.getlocale
and
Sys.localeconv
.
The system of naming locales is OS-specific. There is quite wide agreement on schemes, but not on the details of their implementation. A locale needs to specify
@latin
, @cyrillic
for Serbian, @iqtelif
)
or language dialect (e.g. @saaho
, a dialect of Afar, and
@bokmal
and @nynorsk
, dialects of Norwegian regarded by
some OSes as separate languages, no
and nn
).
R is principally concerned with the first (for translations) and third. Note that the charset may be deducible from the language, as some OSes offer only one charset per language.
• Locales under Unix-alikes: | ||
• Locales under Windows: | ||
• Locales under OS X: |
Next: Locales under Windows, Previous: Locales, Up: Locales [Contents][Index]
Modern Linux uses the XPG18 locale specifications which have the form
‘en_GB’, ‘en_GB.UTF-8’, ‘aa_ER.UTF-8@saaho’,
‘de_AT.iso885915@euro’, the components being in the order listed
above. (See man locale
and locale -a
for more
details.) Similar schemes are used by most Unix-alikes: some (including
some distributions of Linux) use ‘.utf8’ rather than ‘.UTF-8’.
Note that whereas UTF-8 locales are nowadays almost universally used, locales such as ‘en_GB’ use 8-bit encodings for backwards compatibility.
Next: Locales under OS X, Previous: Locales under Unix-alikes, Up: Locales [Contents][Index]
Windows also uses locales, but specified in a rather less concise way. Most users will encounter locales only via drop-down menus, but more information and lists can be found at http://msdn.microsoft.com/en-us/library/hzz3tw78(v=vs.80) (or if Microsoft moves it yet again, search for ‘Windows language country strings’).
It offers only one encoding per language.
Some care is needed with Windows’ locale names. For example,
chinese
is Traditional Chinese and not Simplified Chinese as used
in most of the Chinese-speaking world.
Previous: Locales under Windows, Up: Locales [Contents][Index]
OS X supports locales in its own particular way, but the R GUI tries to
make this easier for users. See
http://developer.apple.com/documentation/MacOSX/Conceptual/BPInternational/
for how users can set their locales. As with Windows, end users will
generally only see lists of languages/territories. Users of R in a
terminal may need to set the locale to something like ‘en_GB.UTF-8’
if it defaults to ‘C’ (as it sometimes does when logging it
remotely and in batch jobs: note whether Terminal
sets the
LANG
environment variable is an (advanced) option, but the
default).
Internally OS X uses a form similar to Linux: the main difference from
other Unix-alikes is that where a character set is not specified it is
assumed to be UTF-8
.
Previous: Locales, Up: Internationalization [Contents][Index]
The preferred language for messages is by default taken from the locale.
This can be overridden first by the setting of the environment variable
LANGUAGE
and then19
by the environment variables LC_ALL
, LC_MESSAGES
and
LANG
. (The last three are normally used to set the locale and so
should not be needed, but the first is only used to select the language
for messages.) The code tries hard to map locales to languages, but on
some systems (notably Windows) the locale names needed for the
environment variable LC_ALL
do not all correspond to XPG language
names and so LANGUAGE
may need to be set. (One example is
‘LC_ALL=es’ on Windows which sets the locale to Estonian and the
language to Spanish.)
It is usually possible to change the language once R is running
via (not Windows) Sys.setlocale("LC_MESSAGES",
"new_locale")
, or by setting an environment variable such as
LANGUAGE
, provided20 the language you are changing to can be output in
the current character set. But this is OS-specific, and has been known
to stop working on an OS upgrade.
Messages are divided into domains, and translations may be available for some or all messages in a domain. R makes use of the following domains.
R
for the C-level error and warning messages from the R
interpreter.
R-pkg
for the R stop
, warning
and
message
messages in each package, including R-base
for the
base package.
pkg
for the C-level messages in each package.
RGui
for the menus etc of the R for Windows GUI front-end.
Dividing up the messages in this way allows R to be extensible: as packages are loaded, their message translation catalogues can be loaded too.
R can be built without support for translations, but it is enabled by default.
R-level and C-level domains are subtly different, for example in the way strings are canonicalized before being passed for translation.
Translations are looked for by domain according to the currently specified language, as specifically as possible, so for example an Austrian (‘de_AT’) translation catalogue will be used in preference to a generic German one (‘de’) for an Austrian user. However, if a specific translation catalogue exists but does not contain a translation, the less specific catalogues are consulted. For example, R has catalogues for ‘en_GB’ that translate the Americanisms (e.g., ‘gray’) in the standard messages into English.21 Two other examples: there are catalogues for ‘es’, which is Spanish as written in Spain and these will by default also be used in Spanish-speaking Latin American countries, and also for ‘pt_BR’, which are used for Brazilian locales but not for locales specifying Portugal.
Translations in the right language but the wrong charset are made use of
by on-the-fly re-encoding. The LANGUAGE
variable (only) can be a
colon-separated list, for example ‘se:de’, giving a set of
languages in decreasing order of preference. One special value is
‘en@quot’, which can be used in a UTF-8 locale to have American
error messages with pairs of single quotes translated to Unicode directional
quotes.
If no suitable translation catalogue is found or a particular message is not translated in any suitable catalogue, ‘English’22 is used.
See http://developer.r-project.org/Translations.html for how to prepare and install translation catalogues.
Next: The standalone Rmath library, Previous: Internationalization, Up: Top [Contents][Index]
Almost all current CPUs have both 32- and 64-bit sets of instructions. Most OSes running on such CPUs offer the choice of building a 32-bit or a 64-bit version of R (and details are given below under specific OSes). For most a 32-bit version is the default, but for some (e.g., ‘x86_64’ Linux and OS X >= 10.6) 64-bit is.
All current versions of R use 32-bit integers and ISO/IEC 6055923 double-precision reals, and so compute to the same precision24 and with the same limits on the sizes of numerical quantities. The principal difference is in the size of the pointers.
64-bit builds have both advantages and disadvantages:
R allocates memory for large objects as needed, and removes any unused ones at garbage collection. When the sizes of objects become an appreciable fraction of the address limit, fragmentation of the address space becomes an issue and there may be no hole available that is the size requested. This can cause more frequent garbage collection or the inability to allocate large objects. As a guide, this will become an issue with objects more than 10% of the size of the address space (around 300Mb) or when the total size of objects in use is around one third (around 1Gb).
configure
selects suitable defines if this is
possible. (We have also largely worked around that limit on 32-bit
Windows.) 64-bit builds have much larger limits.
So, for speed you may want to use a 32-bit build (especially on a laptop), but to handle large datasets (and perhaps large files) a 64-bit build. You can often build both and install them in the same place: See Sub-architectures. (This is done for the Windows binary distributions.)
Even on 64-bit builds of R there are limits on the size of R
objects (see help("Memory-limits")
, some of which stem from the
use of 32-bit integers (especially in FORTRAN code). For example, the
dimensions of an array are limited to 2^{31} - 1.
Next: Essential and useful other programs under a Unix-alike, Previous: Choosing between 32- and 64-bit builds, Up: Top [Contents][Index]
The routines supporting the distribution and special25 functions in R and a few others are declared in C header file Rmath.h. These can be compiled into a standalone library for linking to other applications. (Note that they are not a separate library when R is built, and the standalone version differs in several ways.)
The makefiles and other sources needed are in directory src/nmath/standalone, so the following instructions assume that is the current working directory (in the build directory tree on a Unix-alike if that is separate from the sources).
Rmath.h contains ‘R_VERSION_STRING’, which is a character
string containing the current R version, for example "3.1.0"
.
There is full access to R’s handling of NaN
, Inf
and
-Inf
via special versions of the macros and functions
ISNAN, R_FINITE, R_log, R_pow and R_pow_di
and (extern) constants R_PosInf
, R_NegInf
and NA_REAL
.
There is no support for R’s notion of missing values, in particular
not for NA_INTEGER
nor the distinction between NA
and
NaN
for doubles.
A little care is needed to use the random-number routines. You will need to supply the uniform random number generator
double unif_rand(void)
or use the one supplied (and with a shared library or DLL you may have to use the one supplied, which is the Marsaglia-multicarry with an entry point
set_seed(unsigned int, unsigned int)
to set its seeds).
The facilities to change the normal random number generator are available through the constant N01_kind. This takes values from the enumeration type
typedef enum { BUGGY_KINDERMAN_RAMAGE, AHRENS_DIETER, BOX_MULLER, USER_NORM, INVERSION, KINDERMAN_RAMAGE } N01type;
(and ‘USER_NORM’ is not available).
• Unix-alike standalone: | ||
• Windows standalone: |
Next: Windows standalone, Previous: The standalone Rmath library, Up: The standalone Rmath library [Contents][Index]
If R has not already been made in the directory tree,
configure
must be run as described in the main build
instructions.
Then (in src/nmath/standalone)
make
will make standalone libraries libRmath.a and libRmath.so (libRmath.dylib on OS X): ‘make static’ and ‘make shared’ will create just one of them.
To use the routines in your own C or C++ programs, include
#define MATHLIB_STANDALONE #include <Rmath.h>
and link against ‘-lRmath’ (and ‘-lm’ if needed on your OS).
The example file test.c does nothing useful, but is provided to
test the process (via make test
). Note that you will probably
not be able to run it unless you add the directory containing
libRmath.so to the LD_LIBRARY_PATH
environment variable
(libRmath.dylib, DYLD_LIBRARY_PATH
on OS X).
The targets
make install make uninstall
will (un)install the header Rmath.h and shared and static
libraries (if built). Both prefix=
and DESTDIR
are
supported, together with more precise control as described for the main
build.
‘make install’ installs a file for pkg-config
to use by
e.g.
$(CC) `pkg-config --cflags libRmath` -c test.c $(CC) `pkg-config --libs libRmath` test.o -o test
On some systems ‘make install-strip’ will install a stripped shared library.
Previous: Unix-alike standalone, Up: The standalone Rmath library [Contents][Index]
You need to set up26 almost all the tools to make R and then run (in a Unix-like shell)
(cd ../../gnuwin32; make MkRules) (cd ../../include; make -f Makefile.win config.h Rconfig.h Rmath.h) make -f Makefile.win
Alternatively, in a cmd.exe shell use
cd ../../include make -f Makefile.win config.h Rconfig.h Rmath.h cd ../nmath/standalone make -f Makefile.win
This creates a static library libRmath.a and a DLL Rmath.dll. If you want an import library libRmath.dll.a (you don’t need one), use
make -f Makefile.win shared implib
To use the routines in your own C or C++ programs using MinGW, include
#define MATHLIB_STANDALONE #include <Rmath.h>
and link against ‘-lRmath’. This will use the first found of libRmath.dll.a, libRmath.a and Rmath.dll in that order, so the result depends on which files are present. You should be able to force static or dynamic linking via
-Wl,-Bstatic -lRmath -Wl,dynamic -Wl,-Bdynamic -lRmath
or by linking to explicit files (as in the ‘test’ target in Makefile.win: this makes two executables, test.exe which is dynamically linked, and test-static.exe, which is statically linked).
It is possible to link to Rmath.dll using other compilers, either directly or via an import library: if you make a MinGW import library as above, you will create a file Rmath.def which can be used (possibly after editing) to create an import library for other systems such as Visual C++.
If you make use of dynamic linking you should use
#define MATHLIB_STANDALONE #define RMATH_DLL #include <Rmath.h>
to ensure that the constants like NA_REAL
are linked correctly.
(Auto-import will probably work with MinGW, but it is better to be
sure. This is likely to also work with VC++, Borland and similar
compilers.)
Next: Configuration on a Unix-alike, Previous: The standalone Rmath library, Up: Top [Contents][Index]
This appendix gives details of programs you will need to build R on
Unix-like platforms, or which will be used by R if found by
configure
.
Remember that some package management systems (such as RPM and deb) make a distinction between the user version of a package and the development version. The latter usually has the same name but with the extension ‘-devel’ or ‘-dev’: you need both versions installed.
• Essential programs and libraries: | ||
• Useful libraries and programs: | ||
• Linear algebra: |
Next: Useful libraries and programs, Previous: Essential and useful other programs under a Unix-alike, Up: Essential and useful other programs under a Unix-alike [Contents][Index]
You need a means of compiling C and FORTRAN 90 (see Using FORTRAN). Your C compiler should be
ISO/IEC 6005927, POSIX 1003.1 and C99-compliant.28 R tries to choose suitable flags for
the C compilers it knows about, but you may have to set CC
or
CFLAGS
suitably. For recent versions of gcc
with
glibc
this means including
-std=gnu9929. If the compiler is
detected as gcc
, -std=gnu99 will be appended to
CC
unless it conflicts with a setting of CFLAGS
. (Note
that options essential to run the compiler even for linking, such as
those to set the architecture, should be specified as part of CC
rather than in CFLAGS
.)
Unless you do not want to view graphs on-screen (or use a Mac) you need ‘X11’ installed, including its headers and client libraries. For recent Fedora distributions it means (at least) RPMs ‘libX11’, ‘libX11-devel’, ‘libXt’ and ‘libXt-devel’. On Debian we recommend the meta-package ‘xorg-dev’. If you really do not want these you will need to explicitly configure R without X11, using --with-x=no.
The command-line editing (and command completion) depends on the
GNU readline
library: version 4.2 or later is needed
for all the features to be enabled. Otherwise you will need to
configure with --with-readline=no (or equivalent).
A suitably comprehensive iconv
function is essential. The R
usage requires iconv
to be able to translate between
"latin1"
and "UTF-8"
, to recognize ""
(as the
current encoding) and "ASCII"
, and to translate to and from the
Unicode wide-character formats "UCS-[24][BL]E"
— this is true
for glibc
but not of most commercial Unixes. However, you can
make use of GNU libiconv
(possibly as a plug-in
replacement: see http://www.gnu.org/software/libiconv/).
The OS needs to have enough support30 for wide-character types: this is checked at configuration. A small number of POSIX functions31 are essential, and others32 will be used if available.
A tar
program is needed to unpack the sources and packages
(including the recommended packages). A version33 that can
automagically detect compressed archives is preferred for use with
untar()
: the configure script looks for gtar
and
gnutar
before
tar
: use environment variable TAR
to override this.
There need to be suitable versions of the tools grep
and
sed
: the problems are usually with old AT&T and BSD variants.
configure
will try to find suitable versions (including
looking in /usr/xpg4/bin which is used on some commercial
Unixes).
You will not be able to build most of the manuals unless you have
makeinfo
version 4.7 or later installed, and if not some of
the HTML manuals will be linked to CRAN. To make PDF
versions of the manuals you will also need file texinfo.tex
installed (which is part of the GNU texinfo distribution
but is often made part of the TeX package in re-distributions) as
well as texi2dvi
.34 Further, the versions of texi2dvi
and
texinfo.tex need to be compatible: we have seen problems with
older TeX distributions (TeXLive 2007 and MiKTeX 2.8) used with
texinfo 4.13. It is possible to use texinfo version 5.x,
preferably 5.2 or later.
The PDF documentation (including doc/NEWS.pdf) and building
vignettes needs pdftex
and pdflatex
. We require
LaTeX version 2005/12/01
or later (for UTF-8 support).
Building PDF package manuals (including the R reference manual) and
vignettes is sensitive to the version of the LaTeX package
hyperref and we recommend that the TeX distribution used is
kept up-to-date. A number of standard LaTeX packages are required
(including fancyvrb, url and some of the font packages such
as times, helvetic, ec and cm-super) and others
such as hyperref and inconsolata are desirable (and without
them you may need to change R’s defaults: see Making the manuals). Note that most versions of inconsolata require package
upquote and that hyperref (currently) requires packages
kvoptions, ltxcmds and refcount. For distributions
based on TeXLive the simplest approach may be to install collections
collection-latex, collection-fontsrecommended,
collection-latexrecommended, collection-fontsextra and
collection-latexextra (assuming they are not installed by
default): Fedora uses names like texlive-collection-fontsextra and
Debian/Ubuntu like texlive-fonts-extra.
If you want to build from the R Subversion repository you need both
makeinfo
and pdflatex
.
The essential programs should be in your PATH
at the time
configure
is run: this will capture the full paths.
Next: Linear algebra, Previous: Essential programs and libraries, Up: Essential and useful other programs under a Unix-alike [Contents][Index]
The ability to use translated messages makes use of gettext
and
most likely needs GNU gettext
: you do need this to work
with new translations, but otherwise the version contained in the R
sources will be used if no suitable external gettext
is found.
The ‘modern’ version of the X11()
, jpeg()
, png()
and tiff()
graphics devices uses the cairo
and
(optionally) Pango
libraries. Cairo version 1.2.0 or later is
required. Pango needs to be at least version 1.10, and 1.12 is the
earliest version we have tested. (For Fedora users we believe the
pango-devel
RPM and its dependencies suffice.) R checks for
pkg-config
, and uses that to check first that the
‘pangocairo’ package is installed (and if not, ‘cairo’) and if
additional flags are needed for the ‘cairo-xlib’ package, then if
suitable code can be compiled. These tests will fail if
pkg-config
is not installed, and are likely to fail if
cairo
was built statically (unusual). Most systems with
Gtk+
2.8 or later installed will have suitable libraries. OS X
comes with none of these libraries (but XQuartz, as used for 10.8 and
later, ships cairo
), but cairo
support (without
Pango
) has been added to the binary distribution (see
http://r.research.att.com/libs/ you need fontconfig
,
freetype
and pixman
too): pkg-config
is still
needed when building R from source and can be installed from its
sources.
For the best font experience with these devices you need suitable fonts
installed: Linux users will want the urw-fonts
package. On
platforms which have it available, the msttcorefonts
package35 provides
TrueType versions of Monotype fonts such as Arial and Times New Roman.
Another useful set of fonts is the ‘liberation’ TrueType fonts available
at
https://fedorahosted.org/liberation-fonts/,36 which cover the Latin, Greek and Cyrillic alphabets
plus a fair range of signs. These share metrics with Arial, Times New
Roman and Courier New, and contain fonts rather similar to the first two
(http://en.wikipedia.org/wiki/Liberation_fonts). Then there
is the ‘Free UCS Outline Fonts’ project
(http://www.gnu.org/software/freefont/) which are
OpenType/TrueType fonts based on the URW fonts but with extended Unicode
coverage. See the R help on X11
on selecting such fonts.
The bitmapped graphics devices jpeg()
, png()
and
tiff()
need the appropriate headers and libraries installed:
jpeg
(version 6b or later, or libjpeg-turbo
) or
libpng
(version 1.2.7 or later) and zlib
or libtiff
(any recent version – 3.9.[4567] and 4.0.[23] have been tested)
respectively. They also need support for either X11
or
cairo
(see above). Should support for these devices not
be required or broken system libraries need to be avoided there are
configure
options --without-libpng,
--without-jpeglib and --without-libtiff. For most
system installations the TIFF libraries will require JPEG libraries to
be present and perhaps linked explicitly, so --without-jpeglib
may also disable the tiff()
device. The tiff()
devices
only require a basic build of libtiff
(not even JPEG support is
needed). Recent versions allow several other libraries to be linked
into libtiff
such as lzma
, jbig
and jpeg12
,
and these may need also to be present.
If you have them installed (including the appropriate headers and of
suitable versions), system versions of zlib
, libbz2
and
PCRE will be used if specified by --with-system-zlib (version
1.2.5 or later), --with-system-bzlib or
--with-system-pcre (version 8.10 or later, preferably
8.3437): otherwise versions in the R sources will be
compiled in. As the latter suffice and are tested with R you should
not need to change this.
Option --with-system-tre is also available: it needs a recent
version of TRE. (The current sources are in the git
repository
at https://github.com/laurikari/tre/, but at the time of writing
the resulting build will not pass its checks.).
liblzma
from xz-utils
version 5.0.3 or later will be used
if installed: the version in the R sources can be selected instead by
configuring with --with-system-xz=no. Systems differ in what
they call the package including this: e.g. on Fedora the library is in
‘xz-libs’ and the headers in ‘xz-devel’.
An implementation of XDR is required, and the R sources
contain one which is likely to suffice (although a system version may
have higher performance). XDR is part of RPC and
historically has been part of libc on a Unix-alike. However some
builds of glibc
hide it with the intention that the
TI-RPC library be used instead, in which case libtirpc
(and its development version) needs to be installed, and its headers
need to be on the C include path or in /usr/include/tirpc.
Use of the X11 clipboard selection requires the Xmu
headers and
libraries. These are normally part of an X11 installation (e.g. the
Debian meta-package ‘xorg-dev’), but some distributions have split
this into smaller parts, so for example recent versions of Fedora
require the ‘libXmu’ and ‘libXmu-devel’ RPMs.
Some systems (notably OS X and at least some FreeBSD systems) have
inadequate support for collation in multibyte locales. It is possible
to replace the OS’s collation support by that from ICU (International
Components for Unicode, http://site.icu-project.org/), and this
provides much more precise control over collation on all systems. ICU
is available as sources and as binary distributions for (at least) most
Linux distributions, Solaris, FreeBSD and AIX, usually as libicu
or icu4c
. It will be used by default where available (including
on OS X >= 10.4): should a very old or broken version of ICU be found
this can be suppressed by --without-ICU.
The bitmap
and dev2bitmap
devices and function
embedFonts()
use ghostscript
(http://www.ghostscript.com/). This should either be in your
path when the command is run, or its full path specified by the
environment variable R_GSCMD
at that time.
• Tcl/Tk: | ||
• Java support: | ||
• Other compiled languages: |
Next: Java support, Previous: Useful libraries and programs, Up: Useful libraries and programs [Contents][Index]
The tcltk package needs Tcl/Tk >= 8.4 installed: the sources are available at http://www.tcl.tk/. To specify the locations of the Tcl/Tk files you may need the configuration options
use Tcl/Tk, or specify its library directory
specify location of tclConfig.sh
specify location of tkConfig.sh
or use the configure variables TCLTK_LIBS
and
TCLTK_CPPFLAGS
to specify the flags needed for linking against
the Tcl and Tk libraries and for finding the tcl.h and
tk.h headers, respectively. If you have both 32- and 64-bit
versions of Tcl/Tk installed, specifying the paths to the correct config
files may be necessary to avoid confusion between them.
Versions of Tcl/Tk up to 8.5.12 and 8.6.0 have been tested (including most versions of 8.4.x, but not recently).
Next: Other compiled languages, Previous: Tcl/Tk, Up: Useful libraries and programs [Contents][Index]
The build process looks for Java support on the host system, and if it
finds it sets some settings which are useful for Java-using packages.
JAVA_HOME
can be set to point to a specific JRE/JDK.
Principal amongst these are setting some library paths to the Java
libraries and JVM, which are stored in environment variable
R_JAVA_LD_LIBRARY_PATH
in file R_HOME/etc/ldpaths (or
a sub-architecture-specific version). A typical setting for
‘x86_64’ Linux is
JAVA_HOME=/usr/lib/jvm/java-1.7.0-openjdk-1.7.0.25.x86_64/jre R_JAVA_LD_LIBRARY_PATH=${JAVA_HOME}/lib/amd64/server
Note that this unfortunately depends on the exact version of the JRE/JDK
installed, and so may need updating if the Java installation is updated.
This can be done by running R CMD javareconf
which updates
settings in both etc/Makeconf and
R_HOME/etc/ldpaths. See R CMD javareconf --help
for
details.
Another way of overriding those settings is to set the environment variable
R_JAVA_LD_LIBRARY_PATH
(before R is started, hence not in
~/.Renviron), which suffices to run already-installed
Java-using packages. For example
R_JAVA_LD_LIBRARY_PATH=/usr/lib/jvm/java-1.7.0/jre/lib/amd64/server
It may be possible to avoid this by specifying an invariant link as the path. For example, on that system either of
JAVA_HOME=/usr/lib/jvm/java-1.7.0 JAVA_HOME=/usr/lib/jvm/java-1.7.0/jre
worked.
Previous: Java support, Up: Useful libraries and programs [Contents][Index]
Some add-on packages need a C++ compiler. This is specified by the
configure variables CXX
, CXXFLAGS
and similar.
configure
will normally find a suitable compiler. However, in
most cases this will be a C++98 compiler, and as from R 3.1.0 it is
possible to specify an alternative compiler for use with C++11 by the
configure variables CXX1X
, CXX1XSTD
, CXX1XFLAGS
and
similar. Again, configure
will normally find a suitable value
for CXX1XSTD
if the compiler given by CXX
is capable of
compiling C++11 code, but it is possible that a completely different
compiler will be needed (it is for OS X < 10.9 and Solaris, for
example).
Other packages need full Fortran 90 (or later) support. For source
files with extension .f90 or .f95, the compiler defined by
the macro FC
is used by R CMD INSTALL
. This is found
when R is configured and is often the same as F77
: note that
it is detected by the name of the command without a test that it can
actually compile Fortran 90 code. Set the configure variable FC
to override this if necessary: variables FCFLAGS
,
FCPICFLAGS
, FCLIBS
, SHLIB_FCLD
and
SHLIB_FCLDFLAGS
might also need to be set.
See file config.site in the R source for more details about these variables.
Previous: Useful libraries and programs, Up: Essential and useful other programs under a Unix-alike [Contents][Index]
• BLAS: | ||
• LAPACK: | ||
• Caveats: |
Next: LAPACK, Previous: Linear algebra, Up: Linear algebra [Contents][Index]
The linear algebra routines in R can make use of enhanced BLAS (Basic Linear Algebra Subprograms, http://www.netlib.org/blas/faq.html) routines. However, these have to be explicitly requested at configure time: R provides an internal BLAS which is well-tested and will be adequate for most uses of R.
You can specify a particular BLAS library via a value
for the configuration option --with-blas and not to use an
external BLAS library by --without-blas (the
default). If --with-blas is given with no =
, its value
is taken from the
environment variable BLAS_LIBS
, set for example in
config.site. If neither the option nor the environment variable
supply a value, a search is made for a suitable BLAS. If the
value is not obviously a linker command (starting with a dash or giving
the path to a library), it is prefixed by ‘-l’, so
--with-blas="foo"
is an instruction to link against ‘-lfoo’ to find an external BLAS (which needs to be found both at link time and run time).
The configure code checks that the external BLAS is complete
(it must include all double precision and double complex routines, as
well as LSAME
), and appears to be usable. However, an external
BLAS has to be usable from a shared object (so must contain
position-independent code), and that is not checked.
Some enhanced BLASes are compiler-system-specific
(sunperf
on Solaris38, libessl
on IBM,
Accelerate
on OS X). The correct incantation for
these is usually found via --with-blas with no value on
the appropriate platforms.
Some of the external BLASes are multi-threaded. One issue is
that R profiling (which uses the SIGPROF
signal) may cause
problems, and you may want to disable profiling if you use a
multi-threaded BLAS. Note that using a multi-threaded
BLAS can result in taking more CPU time and even
more elapsed time (occasionally dramatically so) than using a similar
single-threaded BLAS.
Note that under Unix (but not under Windows) if R is compiled against a non-default BLAS and --enable-BLAS-shlib is not used, then all BLAS-using packages must also be. So if R is re-built to use an enhanced BLAS then packages such as quantreg will need to be re-installed.
R relies on ISO/IEC 60559 compliance of an
external BLAS. This can be broken if for example the code
assumes that terms with a zero factor are always zero and do not need to
be computed—whereas x*0
can be NaN
. This is checked in
the test suite.
• ATLAS: | ||
• ACML: | ||
• Goto and OpenBLAS: | ||
• MKL: | ||
• Shared BLAS: |
ATLAS (http://math-atlas.sourceforge.net/) is a “tuned” BLAS that runs on a wide range of Unix-alike platforms. Unfortunately it is usually built as a static library that on some platforms cannot be used with shared objects such as are used in R packages. Be careful when using pre-built versions of ATLAS (they seem to work on ‘ix86’ platforms, but not always on ‘x86_64’ ones).
The usual way to specify ATLAS will be via
--with-blas="-lf77blas -latlas"
if the libraries are in the library path, otherwise by
--with-blas="-L/path/to/ATLAS/libs -lf77blas -latlas"
For example, ‘x86_64’ Fedora needs
--with-blas="-L/usr/lib64/atlas -lf77blas -latlas"
For systems with multiple CPU cores it is possible to use a multi-threaded version of ATLAS, by specifying
--with-blas="-lptf77blas -lpthread -latlas"
Consult its file INSTALL.txt for how to build ATLAS with position-independent code: that file also describes how to build ATLAS as a shared library.
Next: Goto and OpenBLAS, Previous: ATLAS, Up: BLAS [Contents][Index]
For ‘x86_64’ and ‘i686’ processors under Linux there is
the AMD Core Math Library (ACML) http://www.amd.com/acml. For
the gcc
version we could use
--with-blas="-lacml"
if the appropriate library directory (such as
/opt/acml5.1.0/gfortran64/lib) is in the LD_LIBRARY_PATH
.
For other compilers, see the ACML documentation. There is a
multithreaded Linux version of ACML available for recent versions of
gfortran
. To make use of this you will need something like
--with-blas="-L/opt/acml5.1.0/gfortran64_mp/lib -lacml_mp"
(and you may need to arrange for the directory to be in ld.so
cache).
See see Shared BLAS for an alternative (and in many ways preferable) way to use ACML.
The version last tested (5.1.0) failed the reg-BLAS.R test in its
handling of NA
s.
Dr Kazushige Goto wrote another tuned BLAS which is available for several processors and OSes. The final version is known as GotoBLAS2, and was re-released under a much less restrictive licence. Source code can be obtained from http://www.tacc.utexas.edu/tacc-projects/gotoblas2/
Once it is built and installed, it can be used by configuring R with
--with-blas="-lgoto2"
See see Shared BLAS for an alternative (and in many ways preferable) way to use it.
Our understanding is that this project is now frozen and so will not be updated for CPUs released since mid-2010. However, OpenBLAS (http://xianyi.github.com/OpenBLAS/) is a descendant project with support for some current CPUs (e.g. Intel Sandy Bridge and AMD Bulldozer).
Next: Shared BLAS, Previous: Goto and OpenBLAS, Up: BLAS [Contents][Index]
For Intel processors, and perhaps others, and some distributions of Linux, there is Intel’s Math Kernel Library (http://www.intel.com/software/products/mkl/). You are strongly encouraged to read the MKL User’s Guide, which is installed with the library, before attempting to link to MKL. There are also versions of MKL for OS X and Windows, but they did not work with the standard compilers used for R on those platforms.
The MKL interface has changed several times, and may change again: the following notes apply exactly only to version 10.3 but have been used with version 11.1.
Versions 10 and later of MKL support two linking models: the default
model (which is backward compatible with version 9 see below) and the
layered model. The layered model gives the user fine-grained control
over four different library layers: interface, threading, computation,
and run-time library support. Some examples of linking to MKL using this
layered model are given below. (These examples are for GCC compilers on
‘x86_64’.) The choice of interface layer is important on
‘x86_64’ since the Intel Fortran compiler returns complex values
in different registers from the GNU Fortran compiler. You must
therefore use the interface layer that matches your compiler
(mkl_intel*
or mkl_gf*
).
R can be linked to a sequential version of MKL by something like
MKL_LIB_PATH=/opt/intel/mkl/10.311.339/lib/intel64/ export LD_LIBRARY_PATH=$MKL_LIB_PATH MKL="-L${MKL_LIB_PATH} -lmkl_gf_lp64 -lmkl_sequential -lmkl_core" ./configure --with-blas="$MKL" --with-lapack
where some versions may need -lmkl_lapack
before
-lmkl_core
. The order of the libraries is important. The option
--with-lapack is used since MKL contains a tuned copy of LAPACK
as well as BLAS (see LAPACK), although this can be
omitted.
Threaded MKL may be used (according to Zhang Zhang of Intel) by
replacing the line defining the variable MKL
with (Intel OMP)
MKL="-L${MKL_LIB_PATH} -lmkl_gf_lp64 -lmkl_intel_thread \ -lmkl_core -liomp5 -lpthread"
or (GNU OMP)
MKL="-L${MKL_LIB_PATH} -lmkl_gf_lp64 -lmkl_gnu_thread \ -lmkl_core -fopenmp -lpthread"
The default number of threads will be chosen by the OpenMP software, but
can be controlled by setting OMP_NUM_THREADS
or
MKL_NUM_THREADS
, and in recent versions seems to default to a
sensible value for sole use of the machine.
Static threaded MKL may be used (GNU OpenMP) with something like
MKL=" -L${MKL_LIB_PATH} \ -Wl,--start-group \ ${MKL_LIB_PATH}/libmkl_gf_lp64.a \ ${MKL_LIB_PATH}/libmkl_gnu_thread.a \ ${MKL_LIB_PATH}/libmkl_core.a \ -Wl,--end-group \ -lgomp -ldl -lpthread"
(Thanks to Ei-ji Nakama. The -ldl
was needed on a Centos 5
systems and may not be needed everywhere.)
The MKL documentation includes a ‘link line advisor’ which will suggest appropriate incantations: an on-line version was available at http://software.intel.com/en-us/articles/intel-mkl-link-line-advisor/
The default linking model, which was also used by version 9 of MKL, can be used by
--with-blas="-lmkl -lguide -lpthread"
but this may not match your compiler on a 64-bit platform. This is
multi-threaded, but in version 9 the number of threads defaults to 1.
It can be increased by setting OMP_NUM_THREADS
. (Thanks to Andy
Liaw for the information.)
The BLAS library will be used for many of the add-on packages as well as for R itself. This means that it is better to use a shared/dynamic BLAS library, as most of a static library will be compiled into the R executable and each BLAS-using package.
R offers the option of compiling the BLAS into a dynamic
library libRblas
stored in R_HOME/lib and linking
both R itself and all the add-on packages against that library.
This is the default on all platforms except AIX unless an external BLAS is specified and found: for the latter it can be used by specifying the option --enable-BLAS-shlib, and it can always be disabled via --disable-BLAS-shlib.
This has both advantages and disadvantages.
libRblas
, and that can be replaced.
Note though that any dynamic libraries the replacement links to will
need to be found by the linker: this may need the library path to be
changed in R_HOME/etc/ldpaths.
Another option to change the BLAS in use is to symlink a dynamic BLAS library (such as ACML or Goto’s) to R_HOME/lib/libRblas.so. For example, just
mv R_HOME/lib/libRblas.so R_HOME/lib/libRblas.so.keep ln -s /opt/acml5.1.0/gfortran64_mp/lib/libacml_mp.so R_HOME/lib/libRblas.so
will change the BLAS in use to multithreaded ACML. A similar
link works for some versions of the Goto BLAS and perhaps
for MKL (provided the appropriate lib directory is in the
run-time library path or ld.so
cache).
Next: Caveats, Previous: BLAS, Up: Linear algebra [Contents][Index]
Provision is made for using an external LAPACK library, principally to
cope with BLAS libraries which contain a copy of LAPACK (such
as sunperf
on Solaris, Accelerate
on OS X and ACML and MKL
on ‘ix86’/‘x86_64’ Linux). At least LAPACK version 3.2
is required. This can only be done if --with-blas has been used.
However, the likely performance gains are thought to be small (and may be negative), and the default is not to search for a suitable LAPACK library, and this is definitely not recommended. You can specify a specific LAPACK library or a search for a generic library by the configuration option --with-lapack. The default for --with-lapack is to check the BLAS library and then look for an external library ‘-llapack’. Sites searching for the fastest possible linear algebra may want to build a LAPACK library using the ATLAS-optimized subset of LAPACK. To do so specify something like
--with-lapack="-L/path/to/ATLAS/libs -llapack -lcblas"
since the ATLAS subset of LAPACK depends on libcblas
. A value
for --with-lapack can be set via the environment
variable
LAPACK_LIBS
, but this will only be used if --with-lapack
is specified (as the default value is no
) and the BLAS library
does not contain LAPACK.
Since ACML contains a full LAPACK, if selected as the BLAS it can be used as the LAPACK via --with-lapack.
If you do use --with-lapack, be aware of potential problems
with bugs in the LAPACK sources (or in the posted corrections to those
sources). In particular, bugs in DGEEV
and DGESDD
have
resulted in error messages such as
DGEBRD gave error code -10
. Other potential problems are incomplete versions of the libraries, seen several times in Linux distributions over the years.
Please do bear in mind that using --with-lapack is ‘definitely not recommended’: it is provided only because it is necessary on some platforms and because some users want to experiment with claimed performance improvements. Reporting problems where it is used unnecessarily will simply irritate the R helpers.
Note too the comments about ISO/IEC 60559 compliance in the section of external BLAS: these apply equally to an external LAPACK, and for example the Intel MKL documentation says
LAPACK routines assume that input matrices do not contain IEEE 754 special values such as INF or NaN values. Using these special values may cause LAPACK to return unexpected results or become unstable.
We rely on limited support in LAPACK for matrices with 2^{31} or more elements: it is quite possible that an external LAPACK will not have that support.
If you have a pure FORTRAN 77 compiler which cannot compile LAPACK it may be possible to use CLAPACK from http://www.netlib.org/clapack/ by something like
-with-lapack="-lclapack -lf2c"
provided these were built with position-independent code and the calling conventions for double complex function return values match those in the BLAS used, so it may be simpler to use CLAPACK built to use CBLAS and
-with-lapack="-lclapack -lcblas -lf2c"
Previous: LAPACK, Up: Linear algebra [Contents][Index]
As with all libraries, you need to ensure that they and R were
compiled with compatible compilers and flags. For example, this has
meant that on Sun Sparc using the native compilers the flag
-dalign is needed so sunperf
can be used.
On some systems it is necessary that an external BLAS/LAPACK
was built with the same FORTRAN compiler used to build R: known
problems are with R built with gfortran
, see Using gfortran.
Next: Platform notes, Previous: Essential and useful other programs under a Unix-alike, Up: Top [Contents][Index]
• Configuration options: | ||
• Internationalization support: | ||
• Configuration variables: | ||
• Setting the shell: | ||
• Using make: | ||
• Using FORTRAN: | ||
• Compile and load flags: | ||
• Maintainer mode: |
Next: Internationalization support, Previous: Configuration on a Unix-alike, Up: Configuration on a Unix-alike [Contents][Index]
configure
has many options: running
./configure --help
will give a list. Probably the most important ones not covered elsewhere are (defaults in brackets)
use the X Window System [yes]
X include files are in DIR
X library files are in DIR
use readline library (if available) [yes]
attempt to compile support for Rprof()
[yes]
attempt to compile support for Rprofmem()
and tracemem()
[no]
build R as a shared/dynamic library [no]
build the BLAS as a shared/dynamic library [yes, except on AIX]
You can use --without-foo or --disable-foo for the negatives.
You will want to use --disable-R-profiling if you are building a profiled executable of R (e.g. with ‘-pg)’.
Flag --enable-R-shlib causes the make process to build R as a dynamic (shared) library, typically called libR.so, and link the main R executable R.bin against that library. This can only be done if all the code (including system libraries) can be compiled into a dynamic library, and there may be a performance39 penalty. So you probably only want this if you will be using an application which embeds R. Note that C code in packages installed on an R system linked with --enable-R-shlib is linked against the dynamic library and so such packages cannot be used from an R system built in the default way. Also, because packages are linked against R they are on some OSes also linked against the dynamic libraries R itself is linked against, and this can lead to symbol conflicts.
If you need to re-configure R with different options you may need to run
make clean
or even make distclean
before doing so.
Next: Configuration variables, Previous: Configuration options, Up: Configuration on a Unix-alike [Contents][Index]
Translation of messages is supported via GNU gettext
unless disabled by the configure option --disable-nls.
The configure
report will show NLS
as one of the
‘Additional capabilities’ if support has been compiled in, and running
in an English locale (but not the C
locale) will include
Natural language support but running in an English locale
in the greeting on starting R.
Next: Setting the shell, Previous: Internationalization support, Up: Configuration on a Unix-alike [Contents][Index]
If you need or want to set certain configure variables to something other than their default, you can do that by either editing the file config.site (which documents many of the variables you might want to set: others can be seen in file etc/Renviron.in) or on the command line as
./configure VAR=value
If you are building in a directory different from the sources, there can be copies of config.site in the source and the build directories, and both will be read (in that order). In addition, if there is a file ~/.R/config, it is read between the config.site files in the source and the build directories.
There is also a general autoconf
mechanism for
config.site files, which are read before any of those mentioned
in the previous paragraph. This looks first at a file specified by the
environment variable CONFIG_SITE
, and if not is set at files such
as /usr/local/share/config.site and
/usr/local/etc/config.site in the area (exemplified by
/usr/local) where R would be installed.
These variables are precious, implying that they do not have to be exported to the environment, are kept in the cache even if not specified on the command line, checked for consistency between two configure runs (provided that caching is used), and are kept during automatic reconfiguration as if having been passed as command line arguments, even if no cache is used.
See the variable output section of configure --help
for a list of
all these variables.
If you find you need to alter configure variables, it is worth noting that some settings may be cached in the file config.cache, and it is a good idea to remove that file (if it exists) before re-configuring. Note that caching is turned off by default: use the command line option --config-cache (or -C) to enable caching.
• Setting paper size: | ||
• Setting the browsers: | ||
• Compilation flags: | ||
• Making manuals: |
Next: Setting the browsers, Previous: Configuration variables, Up: Configuration variables [Contents][Index]
One common variable to change is R_PAPERSIZE
, which defaults to
‘a4’, not ‘letter’. (Valid values are ‘a4’,
‘letter’, ‘legal’ and ‘executive’.)
This is used both when configuring R to set the default, and when running R to override the default. It is also used to set the paper size when making PDF manuals.
The configure default will most often be ‘a4’ if R_PAPERSIZE
is unset. (If the (Debian Linux) program paperconf
is found
or the environment variable PAPERSIZE
is set, these are used to
produce the default.)
Next: Compilation flags, Previous: Setting paper size, Up: Configuration variables [Contents][Index]
Another precious variable is R_BROWSER
, the default HTML
browser, which should take a value of an executable in the user’s path
or specify a full path.
Its counterpart for PDF files is R_PDFVIEWER
.
Next: Making manuals, Previous: Setting the browsers, Up: Configuration variables [Contents][Index]
If you have libraries and header files, e.g., for GNU
readline, in non-system directories, use the variables LDFLAGS
(for libraries, using ‘-L’ flags to be passed to the linker) and
CPPFLAGS
(for header files, using ‘-I’ flags to be passed to
the C/C++ preprocessors), respectively, to specify these locations.
These default to ‘-L/usr/local/lib’ (LDFLAGS
,
‘-L/usr/local/lib64’ on most 64-bit Linux OSes) and
‘-I/usr/local/include’ (CPPFLAGS
) to catch the most common
cases. If libraries are still not found, then maybe your
compiler/linker does not support re-ordering of -L and
-l flags (this has been reported to be a problem on HP-UX with
the native cc
). In this case, use a different compiler (or a
front end shell script which does the re-ordering).
These flags can also be used to build a faster-running version of R.
On most platforms using gcc
, having ‘-O3’ in
CFLAGS
and FFLAGS
produces worthwhile performance gains
with gcc
and gfortran
, but may result in a less
reliable build (both segfaults and incorrect numeric computations have
been seen). On systems using the GNU linker (especially those
using R as a shared library), it is likely that including
‘-Wl,-O1’ in LDFLAGS
is worthwhile, and
‘'-Bdirect,--hash-style=both,-Wl,-O1'’ is recommended at
http://lwn.net/Articles/192624/. Tuning compilation to a
specific CPU family (e.g. ‘-mtune=native’ for
gcc
) can give worthwhile performance gains, especially on
older architectures such as ‘ix86’.
Previous: Compilation flags, Up: Configuration variables [Contents][Index]
The default settings for making the manuals are controlled by
R_RD4PDF
and R_PAPERSIZE
.
Next: Using make, Previous: Configuration variables, Up: Configuration on a Unix-alike [Contents][Index]
By default the shell scripts such as R will be ‘#!/bin/sh’
scripts (or using the SHELL
chosen by configure). This is
almost always satisfactory, but on a few systems /bin/sh is not a
Bourne shell or clone, and the shell to be used can be changed by
setting the configure variable R_SHELL
to a suitable value (a full
path to a shell, e.g. /usr/local/bin/bash).
Next: Using FORTRAN, Previous: Setting the shell, Up: Configuration on a Unix-alike [Contents][Index]
To compile R, you will most likely find it easiest to use
GNU make
, although the Sun make
works on
Solaris, as does the native FreeBSD make
. The native
make
has been reported to fail on SGI Irix 6.5 and Alpha/OSF1
(aka Tru64).
To build in a separate directory you need a make
that uses the
VPATH
variable, for example GNU make
, or Sun
make
on Solaris 7 or later.
dmake
has also been used. e.g, on Solaris 10.
If you want to use a make
by another name, for example if your
GNU make
is called ‘gmake’, you need to set the
variable MAKE
at configure time, for example
./configure MAKE=gmake
Next: Compile and load flags, Previous: Using make, Up: Configuration on a Unix-alike [Contents][Index]
• Using gfortran: |
To compile R, you need a FORTRAN compiler. The default
is to search for
f95
, fort
, xlf95
,
ifort
, ifc
, efc
, pgf95
lf95
, gfortran
, ftn
, g95
,
f90
, xlf90
, pghpf
, pgf90
,
epcf90
,
g77
, f77
, xlf
, frt
,
pgf77
, cf77
, fort77
, fl32
,
af77
(in that order)40, and use whichever is found first; if none is found,
R cannot be compiled.
However, if CC
is gcc
, the matching FORTRAN compiler
(g77
for gcc
3 and gfortran
for
gcc
4) is used if available.
The search mechanism can be changed using the configure variable
F77
which specifies the command that runs the FORTRAN 77
compiler. If your FORTRAN compiler is in a non-standard location, you
should set the environment variable PATH
accordingly before
running configure
, or use the configure variable F77
to
specify its full path.
If your FORTRAN libraries are in slightly peculiar places, you should
also look at LD_LIBRARY_PATH
or your system’s equivalent to make
sure that all libraries are on this path.
Note that only FORTRAN compilers which convert identifiers to lower case are supported.
You must set whatever compilation flags (if any) are needed to ensure
that FORTRAN integer
is equivalent to a C int
pointer and
FORTRAN double precision
is equivalent to a C double
pointer. This is checked during the configuration process.
Some of the FORTRAN code makes use of COMPLEX*16
variables, which
is a Fortran 90 extension. This is checked for at configure
time41, but you may need to avoid
compiler flags asserting FORTRAN 77 compliance.
Compiling the version of LAPACK in the R sources also requires some Fortran 90 extensions, but these are not needed if an external LAPACK is used.
It might be possible to use f2c
, the FORTRAN-to-C converter
(http://www.netlib.org/f2c), via a script. (An example script
is given in scripts/f77_f2c: this can be customized by setting
the environment variables F2C
, F2CLIBS
, CC
and
CPP
.) You will need to ensure that the FORTRAN type
integer
is translated to the C type int
. Normally
f2c.h contains ‘typedef long int integer;’, which will work
on a 32-bit platform but needs to be changed to ‘typedef int
integer;’ on a 64-bit platform. If your compiler is not gcc
you will need to set
FPICFLAGS
appropriately. Also, the included LAPACK sources
contain constructs that f2c
is unlikely to be able to process,
so you would need to use an external LAPACK library (such as CLAPACK
from http://www.netlib.org/clapack/).
Previous: Using FORTRAN, Up: Using FORTRAN [Contents][Index]
gfortran
is the F95 compiler that is part of
gcc
4.x.y.
On Linux ‘x86_64’ systems there is an incompatibility in the
return conventions for double-complex functions between
gfortran
and g77
which results in the final example
in example(eigen)
hanging or segfaulting under external
BLASs built under g77
(and also some external
LAPACKs). The commonest cases will be detected by a configure
test. Although g77
is long obsolete this is still sometimes
seen with C versions of external software using g77
conventions.
The default FFLAGS
and FCFLAGS
chosen (by
autoconf
) for a GNU FORTRAN compiler is ‘-g
-O2’. This has caused problems (segfaults and infinite loops) on
‘x86_64’ Linux in the past, but seems fine with
gfortran 4.4.4
and later: for gfortran 4.3.x
set
FFLAGS
and FCFLAGS
to use at most ‘-O’.
Next: Maintainer mode, Previous: Using FORTRAN, Up: Configuration on a Unix-alike [Contents][Index]
A wide range of flags can be set in the file config.site or as configure variables on the command line. We have already mentioned
CPPFLAGS
header file search directory (-I) and any other miscellaneous options for the C and C++ preprocessors and compilers
LDFLAGS
path (-L), stripping (-s) and any other miscellaneous options for the linker
and others include
CFLAGS
debugging and optimization flags, C
MAIN_CFLAGS
ditto, for compiling the main program
SHLIB_CFLAGS
for shared objects
FFLAGS
debugging and optimization flags, FORTRAN
SAFE_FFLAGS
ditto for source files which need exact floating point behaviour
MAIN_FFLAGS
ditto, for compiling the main program
SHLIB_FFLAGS
for shared objects
MAIN_LDFLAGS
additional flags for the main link
SHLIB_LDFLAGS
additional flags for linking the shared objects
LIBnn
the primary library directory, lib or lib64
CPICFLAGS
special flags for compiling C code to be turned into a shared object
FPICFLAGS
special flags for compiling Fortran code to be turned into a shared object
CXXPICFLAGS
special flags for compiling C++ code to be turned into a shared object
FCPICFLAGS
special flags for compiling Fortran 95 code to be turned into a shared object
DEFS
defines to be used when compiling C code in R itself
Library paths specified as -L/lib/path in LDFLAGS
are
collected together and prepended to LD_LIBRARY_PATH
(or your
system’s equivalent), so there should be no need for -R or
-rpath flags.
Variables such as CPICFLAGS
are determined where possible by
configure
. Some systems allows two types of PIC flags, for
example ‘-fpic’ and ‘-fPIC’, and if they differ the first
allows only a limited number of symbols in a shared object. Since R
as a shared library has about 6200 symbols, if in doubt use the larger
version.
To compile a profiling version of R, one might for example want to use ‘MAIN_CFLAGS=-pg’, ‘MAIN_FFLAGS=-pg’, ‘MAIN_LDFLAGS=-pg’ on platforms where ‘-pg’ cannot be used with position-independent code.
Beware: it may be necessary to set CFLAGS
and
FFLAGS
in ways compatible with the libraries to be used: one
possible issue is the alignment of doubles, another is the way
structures are passed.
On some platforms configure
will select additional flags for
CFLAGS
, CPPFLAGS
, FFLAGS
, CXXFLAGS
and
LIBS
in R_XTRA_CFLAGS
(and so on). These are for options
which are always required, for example to force IEC 60559
compliance.
Previous: Compile and load flags, Up: Configuration on a Unix-alike [Contents][Index]
There are several files that are part of the R sources but can be
re-generated from their own sources by configuring with option
--enable-maintainer-mode and then running make
in the
build directory. This requires other tools to be installed, discussed
in the rest of this section.
File configure is created from configure.ac and the files
under m4 by autoconf
and aclocal
. There is a
formal version requirement on autoconf
of 2.62 or later, but
it is unlikely that anything other than the most recent versions have
been thoroughly tested.
File src/include/config.h is created by autoheader
.
Grammar files *.y are converted to C sources by an implementation
of yacc
, usually bison -y
: these are found in
src/main and src/library/tools/src. It is known that
earlier versions of bison
generate code which reads (and in
some cases writes) outside array bounds: bison
2.6.1 was found
to be satisfactory.
The ultimate sources for package compiler are in its noweb
directory. To re-create the sources from
src/library/compiler/noweb/compiler.nw, the command
notangle
is required. This is likely to need to be installed
from the sources at http://www.cs.tufts.edu/~nr/noweb/ (and can
also be found on CTAN). The package sources are only re-created even in
maintainer mode if src/library/compiler/noweb/compiler.nw has
been updated.
It is likely that in future creating configure
will need the GNU
‘autoconf archive’ installed. This can be found at
http://www.gnu.org/software/autoconf-archive/ and as a package
(usually called autoconf-archive) in most packaged distributions,
for example Debian, Fedora, OpenCSW, Homebrew and MacPorts.
Next: The Windows toolset, Previous: Configuration on a Unix-alike, Up: Top [Contents][Index]
This section provides some notes on building R on different Unix-alike platforms. These notes are based on tests run on one or two systems in each case with particular sets of compilers and support libraries. Success in building R depends on the proper installation and functioning of support software; your results may differ if you have other versions of compilers and support libraries.
Older versions of this manual (for R < 2.10.0) contain notes on platforms such as HP-UX, IRIX and Alpha/OSF1 for which we have had no recent reports.
C macros to select particular platforms can be tricky to track down (there is a fair amount of misinformation on the Web). The Wiki (currently) at http://sourceforge.net/p/predef/wiki/Home/ can be helpful. The R sources currently use
AIX: _AIX Cygwin: __CYGWIN__ FreeBSD: __FreeBSD__ HP-UX: __hpux__, __hpux IRIX: sgi, __sgi Linux: __linux__ OS X: __APPLE__ NetBSD: __NetBSD__ OpenBSD: __OpenBSD__ Solaris: __sun, sun Windows: _WIN32, _WIN64
• X11 issues: | ||
• Linux: | ||
• OS X: | ||
• Solaris: | ||
• AIX: | ||
• FreeBSD: | ||
• Cygwin: | ||
• New platforms: |
Next: Linux, Previous: Platform notes, Up: Platform notes [Contents][Index]
The ‘X11()’ graphics device is the one started automatically on Unix-alikes when plotting. As its name implies, it displays on a (local or remote) X server, and relies on the services provided by the X server.
The ‘modern’ version of the ‘X11()’ device is based on ‘cairo’ graphics and (in most implementations) uses ‘fontconfig’ to pick and render fonts. This is done on the server, and although there can be selection issues, they are more amenable than the issues with ‘X11()’ discussed in the rest of this section.
When X11 was designed, most displays were around 75dpi, whereas today they are of the order of 100dpi or more. If you find that X11() is reporting42 missing font sizes, especially larger ones, it is likely that you are not using scalable fonts and have not installed the 100dpi versions of the X11 fonts. The names and details differ by system, but will likely have something like Fedora’s
xorg-x11-fonts-75dpi xorg-x11-fonts-100dpi xorg-x11-fonts-ISO8859-2-75dpi xorg-x11-fonts-Type1 xorg-x11-fonts-cyrillic
and you need to ensure that the ‘-100dpi’ versions are installed
and on the X11 font path (check via xset -q
). The
‘X11()’ device does try to set a pointsize and not a pixel size:
laptop users may find the default setting of 12 too large (although very
frequently laptop screens are set to a fictitious dpi to appear like a
scaled-down desktop screen).
More complicated problems can occur in non-Western-European locales, so
if you are using one, the first thing to check is that things work in
the C
locale. The likely issues are a failure to find any fonts
or glyphs being rendered incorrectly (often as a pair of ASCII
characters). X11 works by being asked for a font specification and
coming up with its idea of a close match. For text (as distinct from
the symbols used by plotmath), the specification is the first element of
the option "X11fonts"
which defaults to
"-adobe-helvetica-%s-%s-*-*-%d-*-*-*-*-*-*-*"
If you are using a single-byte encoding, for example ISO 8859-2 in
Eastern Europe or KOI8-R in Russian, use xlsfonts
to find an
appropriate family of fonts in your encoding (the last field in the
listing). If you find none, it is likely that you need to install
further font packages, such as ‘xorg-x11-fonts-ISO8859-2-75dpi’ and
‘xorg-x11-fonts-cyrillic’ shown in the listing above.
Multi-byte encodings (most commonly UTF-8) are even more complicated. There are few fonts in ‘iso10646-1’, the Unicode encoding, and they only contain a subset of the available glyphs (and are often fixed-width designed for use in terminals). In such locales fontsets are used, made up of fonts encoded in other encodings. If the locale you are using has an entry in the ‘XLC_LOCALE’ directory (typically /usr/share/X11/locale, it is likely that all you need to do is to pick a suitable font specification that has fonts in the encodings specified there. If not, you may have to get hold of a suitable locale entry for X11. This may mean that, for example, Japanese text can be displayed when running in ‘ja_JP.UTF-8’ but not when running in ‘en_GB.UTF-8’ on the same machine (although on some systems many UTF-8 X11 locales are aliased to ‘en_US.UTF-8’ which covers several character sets, e.g. ISO 8859-1 (Western European), JISX0208 (Kanji), KSC5601 (Korean), GB2312 (Chinese Han) and JISX0201 (Kana)).
On some systems scalable fonts are available covering a wide range of glyphs. One source is TrueType/OpenType fonts, and these can provide high coverage. Another is Type 1 fonts: the URW set of Type 1 fonts provides standard typefaces such as Helvetica with a larger coverage of Unicode glyphs than the standard X11 bitmaps, including Cyrillic. These are generally not part of the default install, and the X server may need to be configured to use them. They might be under the X11 fonts directory or elsewhere, for example,
/usr/share/fonts/default/Type1 /usr/share/fonts/ja/TrueType
Next: OS X, Previous: X11 issues, Up: Platform notes [Contents][Index]
Linux is the main development platform for R, so compilation from the sources is normally straightforward with the standard compilers.
Remember that some package management systems (such as RPM and
deb) make a distinction between the user version of a package and the
developer version. The latter usually has the same name but with the
extension ‘-devel’ or ‘-dev’: you need both versions
installed. So please check the configure
output to see if the
expected features are detected: if for example ‘readline’ is
missing add the developer package. (On most systems you will also need
‘ncurses’ and its developer package, although these should be
dependencies of the ‘readline’ package(s).)
When R has been installed from a binary distribution there are sometimes problems with missing components such as the FORTRAN compiler. Searching the ‘R-help’ archives will normally reveal what is needed.
It seems that ‘ix86’ Linux accepts non-PIC code in shared
libraries, but this is not necessarily so on other platforms, in
particular on 64-bit CPUs such as ‘x86_64’. So care
can be needed with BLAS libraries and when building R as a
shared library to ensure that position-independent code is used in any
static libraries (such as the Tcl/Tk libraries, libpng
,
libjpeg
and zlib
) which might be linked against.
Fortunately these are normally built as shared libraries with the
exception of the ATLAS BLAS libraries.
The default optimization settings chosen for CFLAGS
etc are
conservative. It is likely that using -mtune will result in
significant performance improvements on recent CPUs (especially for
‘ix86’): one possibility is to add -mtune=native for
the best possible performance on the machine on which R is being
installed: if the compilation is for a site-wide installation, it may
still be desirable to use something like
-mtume=core2.43 It is also possible to increase the
optimization levels to -O3: however for many versions of the
compilers this has caused problems in at least one CRAN
package.
For platforms with both 64- and 32-bit support, it is likely that
LDFLAGS="-L/usr/local/lib64 -L/usr/local/lib"
is appropriate since most (but not all) software installs its 64-bit libraries in /usr/local/lib64. To build a 32-bit version of R on ‘x86_64’ with Fedora 18 we used
CC="gcc -m32" CXX="g++ -m32" F77="gfortran -m32" FC=${F77} OBJC=${CC} LDFLAGS="-L/usr/local/lib" LIBnn=lib
Note the use of ‘LIBnn’: ‘x86_64’ Fedora installs its
64-bit software in /usr/lib64 and 32-bit software in
/usr/lib. Linking will skip over inappropriate binaries, but for
example the 32-bit Tcl/Tk configure scripts are in /usr/lib. It
may also be necessary to set the pkg-config
path, e.g. by
export PKG_CONFIG_PATH=/usr/local/lib/pkgconfig:/usr/lib/pkgconfig
64-bit versions of Linux are built with support for files > 2Gb, and 32-bit versions will be if possible unless --disable-largefile is specified.
To build a 64-bit version of R on ‘ppc64’ (also known as
‘powerpc64’) with gcc
4.1.1, Ei-ji Nakama used
CC="gcc -m64" CXX="gxx -m64" F77="gfortran -m64" FC="gfortran -m64" CFLAGS="-mminimal-toc -fno-optimize-sibling-calls -g -O2" FFLAGS="-mminimal-toc -fno-optimize-sibling-calls -g -O2"
the additional flags being needed to resolve problems linking against libnmath.a and when linking R as a shared library.
• Clang: | ||
• Intel compilers: | ||
• Oracle Solaris Studio compilers: |
Next: Intel compilers, Previous: Linux, Up: Linux [Contents][Index]
R has been built with Linux ‘ix86’ and ‘x86_64’ C and
C++ compilers (http://clang.llvm.org) based on the Clang
front-ends, invoked by CC=clang CXX=clang++
, together with
gfortran
. These take very similar options to the
corresponding GCC compilers.
This has to be used in conjunction with a Fortran compiler: the
configure
code will remove -lgcc from FLIBS
,
which is needed for some versions of gfortran
.
The current default for clang++
is to use the C++ runtime from
the installed g++
. Using the runtime from the libc++
project (http://libcxx.llvm.org/) has also been tested: for some
R packages only the variant using libcxxabi
was successful.
Next: Oracle Solaris Studio compilers, Previous: Clang, Up: Linux [Contents][Index]
Intel compilers have been used under ‘ix86’ and ‘x86_64’ Linux. Brian Ripley used version 9.0 of the compilers for ‘x86_64’ on Fedora Core 5 with
CC=icc CFLAGS="-g -O3 -wd188 -ip -mp" F77=ifort FLAGS="-g -O3 -mp" CXX=icpc CXXFLAGS="-g -O3 -mp" FC=ifort FCFLAGS="-g -O3 -mp" ICC_LIBS=/opt/compilers/intel/cce/9.1.039/lib IFC_LIBS=/opt/compilers/intel/fce/9.1.033/lib LDFLAGS="-L$ICC_LIBS -L$IFC_LIBS -L/usr/local/lib64" SHLIB_CXXLD=icpc
configure
will add ‘-c99’ to CC
for
C99-compliance. This causes warnings with icc
10 and later, so
use CC="icc -std=c99"
there. The flag -wd188 suppresses
a large number of warnings about the enumeration type ‘Rboolean’.
Because the Intel C compiler sets ‘__GNUC__’ without complete
emulation of gcc
, we suggest adding CPPFLAGS=-no-gcc
.
To maintain correct IEC 60559 arithmetic you most likely
need add flags to CFLAGS
, FFLAGS
and CXXFLAGS
such
as -mp (shown above) or -fp-model precise -fp-model
source, depending on the compiler version.
Others have reported success with versions 10.x and 11.x.
Previous: Intel compilers, Up: Linux [Contents][Index]
Brian Ripley tested the Sun Studio 12 compilers, since renamed to Oracle Solaris Studio, (http://developers.sun.com/sunstudio/index.jsp) On ‘x86_64’ Linux with
CC=suncc CFLAGS="-xO5 -xc99 -xlibmil -nofstore" CPICFLAGS=-Kpic F77=sunf95 FFLAGS="-O5 -libmil -nofstore" FPICFLAGS=-Kpic CXX="sunCC -library=stlport4" CXXFLAGS="-xO5 -xlibmil -nofstore -features=tmplrefstatic" CXXPICFLAGS=-Kpic FC=sunf95 FCFLAGS=$FFLAGS FCPICFLAGS=-Kpic LDFLAGS=-L/opt/sunstudio12.1/rtlibs/amd64 SHLIB_LDFLAGS=-shared SHLIB_CXXLDFLAGS=-G SHLIB_FCLDFLAGS=-G SAFE_FFLAGS="-O5 -libmil"
-m64 could be added, but was the default. Do not use -fast: see the warnings under Solaris. (The C++ options are also explained under Solaris.)
Others have found on at least some versions of ‘ix86’ Linux that
the configure flag --disable-largefile was needed (since
glob.h on that platform presumed gcc
was being used).
Next: Solaris, Previous: Linux, Up: Platform notes [Contents][Index]
You can build R using Apple’s ‘Command-line Tools for Xcode’ and and
suitable compilers. You will also need readline
(or to configure
with --without-readline). That and other binary components are
available from http://r.research.att.com/libs.
You may also need to install an X sub-system (or you will need to configure using option --without-x): X is part of the standard OS X distribution in versions prior to Mountain Lion, but not always installed. For Mountain Lion and later, see http://xquartz.macosforge.org/. (Note that XQuartz will likely need to be re-installed after an OS upgrade.)
In principle R can be built for 10.4.x, 10.5.x and for PowerPC Macs but this has not been tested recently: 10.6 (Snow Leopard) is the earliest version currently tested. 32-bit Intel builds of R 3.0.0 were tested: they would be needed for Snow Leopard running on very old machines with Core Solo or Core Duo CPUs. The instructions here are for ‘x86_64’ builds.
To use the quartz()
graphics device you need to configure with
--with-aqua (which is the default): quartz()
then
becomes the default device when running R at the console and X11
would only be used for the data editor/viewer. (This needs an
Objective-C compiler44 which can compile the code for quartz()
.)
Use --without-aqua if you want a standard Unix-alike build:
apart from disabling quartz()
and the ability to use the build
with R.APP, it also changes the default location of the personal
library (see ?.libPaths()
). Also use
--disable-R-framework to install in the standard layout.
‘Command-line Tools for Xcode’ used to be part of the Apple Developer Tools (‘Xcode’) but nowadays need to be installed separately. They can be downloaded from http://developer.apple.com/devcenter/mac/ (you will need to register there: that allows you to download older versions available for your OS) or some versions of Xcode (from the App Store or from http://developer.apple.com/devcenter/mac/) you can install the command-line tools from within Xcode, from the ‘Downloads’ pane in the ‘Preferences’. For Mavericks, see the specific sub-section below.
Various compilers can be used. The current CRAN ‘Snow Leopard’ distribution of R is built using
gcc
from an Xcode distribution prior to version 5. This is a version of gcc
4.2.1 with an LLVM backend.
gfortran
from
http://cran.r-project.org/bin/macosx/tools/gfortran-4.2.3.pkg.
Note that this installs into /usr/local/bin, so make sure that is
on your path. Other compilers from
http://r.research.att.com/tools/ can also be used.
clang
from the Xcode distribution, to compile the Objective-C parts of the
quartz()
device.
To use these, have in config.site something like
CC="llvm-gcc-4.2" CXX="llvm-g++-4.2" F77="gfortran-4.2 -arch x86_64" FC=$F77 OBJC="clang"
Full names help to ensure that the intended compilers are used. In
particular gcc
is a copy of llvm-gcc-4.2
for Xcode <
5 but of clang
in Xcode 5. The recommended Fortran compiler
defaults to 32-bit, so -arch x86_64
is needed. (For a 32-bit
build, use -arch i386
for all compiler commands.)
The OpenMP support in this version of gcc
is problematic, so
the CRAN build is configured with --disable-openmp.
The current CRAN ‘Mavericks’ distribution of R is built using
CC=clang CXX=clang++ F77=gfortran-4.8 FC=$F77 OBJC=clang
with clang
and clang++
from Xcode 5, and the Fortran
compiler from
http://r.research.att.com/libs/gfortran-4.8.2-darwin13.tar.bz2.45 Apple’s
build of clang
has no OpenMP support.
Pre-compiled versions of many of the Useful libraries and programs
are available from http://r.research.att.com/libs/. You will
most likely want at least jpeg
, libpng
and readline
(and perhaps tiff
). pkg-config
is not provided by Apple
and useful for many packages: it will also be used if present when
configuring the X11()
device.
The Accelerate
library can be used via the configuration options
--with-blas="-framework Accelerate" --with-lapack
to provide potentially higher-performance versions of the BLAS
and LAPACK routines. (Use of Accelerate
with
--with-lapack does not work on Snow Leopard: it may work there
without.)46
Looking at the top of /Library/Frameworks/R.framework/Resources/etc/Makeconf will show the compilers and configuration options used for the CRAN binary package for R: at the time of writing
--with-system-zlib --enable-memory-profiling --disable-openmp
was used for ‘Snow Leopard’ and the first two for ‘Mavericks’.
Configure option --with-internal-tzcode is the default, as a
64-bit time_t
is available but the system implementation of time
zones does not work correctly for times before 1902 or after 2037.
The TeX implementation used by the developers is MacTeX (http://www.tug.org/mactex/): the full installation is about 4GB, but a smaller version is available at http://www.tug.org/mactex/morepackages.html: you will need to add some packages, e.g. for the 2014 version we needed to add cm-super, ec, helvetic, inconsolata and texinfo which brought this to about 380MB (or package texinfo and the collections collection-fontsrecommended, collection-fontsextra and collection-latexextra which will take this up to about 1GB). ‘TeX Live Utility’ (available via the MacTeX front page) provides a graphical means to manage TeX packages.
• Snow Leopard: | ||
• Lion: | ||
• Mountain Lion: | ||
• Mavericks: | ||
• Tcl/Tk headers and libraries: | ||
• Java (OS X): | ||
• Frameworks: | ||
• Building R.app: |
A quirk on Snow Leopard is that the X11 libraries are not in the default
linking path, so something like ‘LIBS=-L/usr/X11/lib’ may be
required in config.site, or you can use the configure
options --x-includes=/usr/X11/include
--x-libraries=/usr/X11/lib .
The CRAN binaries are built using Xcode 4.2, a version available only to subscribing developers. It is believed that 3.2.6 (the last public free version for Snow Leopard) will work.
Next: Mountain Lion, Previous: Snow Leopard, Up: OS X [Contents][Index]
No tweaks are known to be needed on Lion. See the notes on Mountain Lion if XQuartz is in use.
The X11 system used with Mountain Lion is XQuartz (see above).
To build the graphics devices depending on cairographics the XQuartz
path for pkg-config
files needs to be known to
pkg-config
when configure
is run: this usually means
adding it to the PKG_CONFIG_PATH
environment variable, e.g.
export PKG_CONFIG_PATH= \ /opt/X11/lib/pkgconfig:/usr/local/lib/pkgconfig:/usr/lib/pkgconfig
or putting
PKG_CONFIG_PATH=/opt/X11/lib/pkgconfig:/usr/local/lib/pkgconfig:/usr/lib/pkgconfig
in config.site.
For some pre-compiled software, for example the GTK framework, /opt/X11/include may need to be added to the include paths.
If you install the command-line tools for Xcode 4.6.3 you will get the compilers used for the CRAN binary distribution: those for Xcode 5 can be installed afterwards.
Next: Tcl/Tk headers and libraries, Previous: Mountain Lion, Up: OS X [Contents][Index]
Xcode for Mavericks provides different compilers, headers and libraries from
earlier versions. In particular the compilers (even those called
gcc
and g++
) are based on clang
, and the
C++ headers and runtime are from LLVM’s ‘libc++’ project).
The command-line tools can be (re-)installed by xcode-select
--install
. (If you have a fresh installation of Mavericks, running
e.g. make
in a terminal will offer the installation of the
command-line tools, or perhaps use the versions from Xcode. However,
after an update to Mavericks, you are advised to re-install them.) They
are not available under the ‘Downloads’ preference pane in Xcode.
To use the compilers from the command-line tools for Xcode 5 with the recommended Fortran compiler, have in config.site something like
CC=clang CXX=clang++ F77=gfortran-4.8 FC=$F77 OBJC=clang
(CC=gcc
and CXX=g++
are slightly different front-ends to
the same compilers.) Recent versions of the CRAN binary package
installer for ‘Snow Leopard’ change the settings in etc/Makeconf
to
CC = gcc -arch x86_64 -std=gnu99 CXX g++ -arch x86_64 F77 = gfortran-4.2 -arch x86_64 OBJC = gcc -arch x86_64 OBJCXX = g++ -arch x86_64
when installing on Mavericks.
See the comments under Mountain Lion about X11 and GTK.
Next: Java (OS X), Previous: Mavericks, Up: OS X [Contents][Index]
If you plan to use the tcltk
package for R, you need to
install a distribution of Tcl/Tk. There are two alternatives. If you
use R.APP you will want to use X11-based Tcl/Tk (as used on other
Unix-alikes), which is installed as part of the CRAN binary for R.
This may need
-with-tcltk=/usr/local/lib
or
--with-tcl-config=/usr/local/lib/tclConfig.sh --with-tk-config=/usr/local/lib/tkConfig.sh
Note that this expects a fully-updated X11 installation.
There is also a native (‘Aqua’) version of Tcl/Tk which produces widgets in the native OS X style: this will not work with R.APP because of conflicting event loops, but for those only using command-line R this provides a much more intuitive interface to Tk for experienced Mac users. Most versions of OS X come with Aqua Tcl/Tk libraries, but these are not current versions of Tcl/Tk (8.5.9 in Mountain Lion and Mavericks). It is better to install Tcl/Tk 8.6.x or 8.5.x from the sources or the binary distribution at http://www.activestate.com/activetcl/downloads. Configure R with
--with-tcl-config=/Library/Frameworks/Tcl.framework/tclConfig.sh --with-tk-config=/Library/Frameworks/Tk.framework/tkConfig.sh
(for the versions bundled with OS X, use paths starting with /System/Library).
Next: Frameworks, Previous: Tcl/Tk headers and libraries, Up: OS X [Contents][Index]
The situation with Java support on OS X is messy, with Apple essentially no longer supporting Java (and what it does support is Java 6, which has reached end-of-life). Snow Leopard and Lion shipped with a Java 6 runtime (JRE).
Mountain Lion and Mavericks do not come with an installed JRE, and an
upgrade to either removes one if already installed: it is intended to be
installed at first use. Check if a JRE is installed by running
java -version
in a Terminal
window: if Java is not
installed this should prompt you to install it.
However, you may want/need to install the latest Java from Oracle (currently Java 7 from http://www.oracle.com/technetwork/java/javase/downloads/index.html); this is for Lion and later.
To see what compatible versions of Java are currently installed, run
/usr/libexec/java_home -V -a x86_64
. If needed, set the
environment variable JAVA_HOME
to choose between these, both when
R is built from the sources and when R CMD javareconf
is
run.
Configuring and building R both looks for a JRE and for support for compiling JNI programs (used by packages rJava and JavaGD); the latter requires a JDK (Java SDK) and not just a JRE.
The build process tries to fathom out what JRE/JDK to use, but it may
need some help, e.g. by setting JAVA_HOME
. The Apple JRE can be
specified explicitly by something like
JAVA_HOME=/System/Library/Frameworks/JavaVM.framework/Home JAVA_CPPFLAGS="-I/System/Library/Frameworks/JavaVM.framework/Headers" JAVA_LD_LIBRARY_PATH= JAVA_LIBS="-framework JavaVM"
The Apple developer versions of the JDK install somewhere like
JAVA_HOME=/Library/Java/JavaVirtualMachines/1.6.0_43-b01-447.jdk/Contents/Home
The Oracle JDK can be specified explicitly by something like
JAVA_HOME=/Library/Java/JavaVirtualMachines/jdk1.7.0_45.jdk/Contents/Home JAVA_CPPFLAGS="-I/${JAVA_HOME}/include -I/${JAVA_HOME}/include/darwin" JAVA_LD_LIBRARY_PATH="${JAVA_HOME}/jre/lib/server" JAVA_LIBS="-L/${JAVA_HOME}/jre/lib/server -ljvm"
in config.site.
Note that it is necessary to set the environment variable NOAWT
to 1
to install many of the Java-using packages.
Next: Building R.app, Previous: Java (OS X), Up: OS X [Contents][Index]
The CRAN build of R is installed as a framework, which is selected by the default option
./configure --enable-R-framework
(This is intended to be used with an Apple toolchain: other compilers may not support frameworks correctly.)
It is only needed if you want to build R for use with the R.APP console, and implies --enable-R-shlib to build R as a dynamic library. This option configures R to be built and installed as a framework called R.framework. The default installation path for R.framework is /Library/Frameworks but this can be changed at configure time by specifying the flag --enable-R-framework[=DIR] or at install time as
make prefix=/where/you/want/R.framework/to/go install
Note that installation as a framework is non-standard (especially to a
non-standard location) and utilities may not support it (e.g. the
pkg-config
file libR.pc will be put somewhere unknown
to pkg-config
).
Previous: Frameworks, Up: OS X [Contents][Index]
Note that building the R.APP GUI console is a separate project, using Xcode. Before compiling R.APP make sure the current version of R is installed in /Library/Frameworks/R.framework and working at the command-line (this can be a binary install).
The current sources can be checked out by
svn co https://svn.r-project.org/R-packages/trunk/Mac-GUI
This can be built by loading the R.xcodeproj
project (select the
R
target and the SnowLeopard64
or Lion64
configuration), or from the command-line by e.g.
xcodebuild -target R -configuration SnowLeopard64
See also the INSTALL file in the checkout or directly at https://svn.r-project.org/R-packages/trunk/Mac-GUI/INSTALL.
R.APP does not need to be installed in any specific way. Building R.APP results in the R.APP bundle which appears as one R icon. This application bundle can be run anywhere and it is customary to place it in the /Applications folder.
Next: AIX, Previous: OS X, Up: Platform notes [Contents][Index]
R has been built successfully on Solaris 10 (both Sparc and
‘x86’) using the (zero cost) Oracle Solaris Studio compilers:
there has been some success with
gcc
4/gfortran
. (Recent Sun machines are AMD
Opterons or Intel Xeons (‘amd64’) rather than ‘x86’, but
32-bit ‘x86’ executables are the default.)
There have been few reports on Solaris 11, with no known extra issues. Solaris 9 and earlier are now so old that it is unlikely that R is still used with them, and they will not be considered here.
The Solaris versions of several of the tools needed to build R
(e.g. make
, ar
and ld
) are in
/usr/ccs/bin, so if using those tools ensure this is in your
path. A version of the preferred GNU tar
is (if
installed) in /usr/sfw/bin, as sometimes are tools like
makeinfo
. It may be necessary to avoid the tools in
/usr/ucb: POSIX-compliant versions of some tools can be found in
/usr/xpg4/bin and /usr/xpg6/bin.
A large selection of Open Source software can be installed from http://www.opencsw.org, by default installed under /opt/csw.
You will need GNU libiconv
and readline
: the
Solaris version of iconv
is not sufficiently powerful.
The native make
suffices to build R but a small number of
packages require GNU make
(some without good reason
and without declaring it as ‘SystemRequirements’ in the
DESCRIPTION file).
Some people have reported that the Solaris libintl
needs to be
avoided, for example by using --disable-nls or
--with-included-gettext or using libintl
from OpenCSW.
The support for the C99 long double
type on Sparc hardware uses
quad-precision arithmetic, and this is usually slow because it is done
by software emulation. On such systems configure
option
--disable-long-double can be used for faster but less accurate
computations.
The Solaris time-zone conversion services seem to be unreliable pre-1916
in Europe (when daylight-savings time was first introduced): most often
reporting in the non-existent DST variant. Using configure
option --with-internal-tzcode is recommended, and required if
you find time-zone abbreviations being given odd values (as has been
seen on 64-bit builds without it).
When using the Oracle compilers47 do not specify -fast, as this
disables IEEE arithmetic and make check
will fail.
It has been reported that some Solaris installations need
INTERNET_LIBS="-lsocket -lnsl"
on the configure
command line or in file config.site;
however, there have been many successful installs without this.
A little juggling of paths was needed to ensure GNU
libiconv
(in /usr/local) was used rather than the Solaris
iconv
:
CC="cc -xc99" CFLAGS="-O -xlibmieee" F77=f95 FFLAGS=-O CXX="CC -library=stlport4" CXXFLAGS=-O FC=f95 FCFLAGS=$FFLAGS FCLIBS="-lfai -lfsu" R_LD_LIBRARY_PATH="/usr/local/lib:/opt/csw/gcc4/lib:/opt/csw/lib"
For a 64-bit target add -m64 to the compiler macros
and use something like LDFLAGS=-L/usr/local/lib/sparcv9
or
LDFLAGS=-L/usr/local/lib/amd64
as appropriate.
It will also be necessary to point pkg-config
at the 64-bit
directories, e.g. one of
PKG_CONFIG_PATH=/opt/csw/lib/amd64/pkgconfig:/usr/lib/amd64/pkgconfig PKG_CONFIG_PATH=/opt/csw/lib/sparcv9/pkgconfig:/usr/lib/sparcv9/pkgconfig
and to specify a 64-bit Java VM by e.g.
JAVA_CPPFLAGS="-I${JAVA_HOME}/../include -I${JAVA_HOME}/../include/solaris" JAVA_LD_LIBRARY_PATH=${JAVA_HOME}/lib/amd64/server JAVA_LIBS="-L${JAVA_HOME}/lib/amd64/server \ -R${JAVA_HOME}/lib/amd64/server -ljvm"
With Solaris Studio 12.[23] on Sparc, FCLIBS
needs to be
FCLIBS="-lfai -lfai2 -lfsu"
(and possibly other Fortran libraries, but this suffices for the packages currently on CRAN).
Currently ‘amd64’ and ‘sparcv9’ builds work
out-of-the-box with Sun Studio 12u1 but not Solaris Studio 12.2 and
12.3: libRblas.so and lapack.so are generated with code
that causes relocation errors (which is being linked in from the Fortran
libraries). This means that building 64-bit R as a shared library
may be impossible with Solaris Studio >= 12.2. For a standard build the
trick seems to be to manually set FLIBS
to avoid the troublesome
libraries. For example, on ‘amd64’ set in config.site
something like
FLIBS_IN_SO="-R/opt/solarisstudio12.3/lib/amd64 /opt/solarisstudio12.3/lib/amd64/libfui.so /opt/solarisstudio12.3/lib/amd64/libfsu.so"
For 64-bit Sparc, set in config.site something like
FLIBS="-R/opt/solarisstudio12.3/prod/lib/sparc/64 -lifai -lsunimath -lfai -lfai2 -lfsumai -lfprodai -lfminlai -lfmaxlai -lfminvai -lfmaxvai -lfui -lsunmath -lmtsk /opt/solarisstudio12.3/prod/lib/sparc/64/libfsu.so.1"
By default the Solaris Studio compilers do not by default conform to the C99
standard (appendix F 8.9) on the return values of functions such as
log
: use -xlibmieee to ensure this.
You can target specific Sparc architectures for (slightly) higher
performance: -xtarget=native (in CFLAGS
etc) tunes the
compilation to the current machine.
Using -xlibmil
in CFLAGS
and -xlibmil
in
FFLAGS
allows more system mathematical functions to be inlined.
On ‘x86’ you will get marginally higher performance via
CFLAGS="-xO5 -xc99 -xlibmieee -xlibmil -nofstore -xtarget=native" FFLAGS="-O5 -libmil -nofstore -xtarget=native" CXXFLAGS="-xO5 -xlibmil -nofstore -xtarget=native" SAFE_FFLAGS="-libmil -fstore -xtarget=native"
but the use of -nofstore
can be less numerically stable, and some
packages (notably mgcv on ‘x86’) failed to compile at
higher optimization levels with version 12.3.
The Solaris Studio compilers provide several implementations of the C++98 standard which select both the set of headers and a C++ runtime library. These are selected by the -library flag, which as it is needed for both compiling and linking is best specified as part of the compiler. The examples above use ‘stlport4’, currently the most modern of the options: the default (but still needed to be specified as it is needed for linking) is ‘Cstd’: see http://developers.sun.com/solaris/articles/cmp_stlport_libCstd.html. Note though that most external Solaris C++ libraries will have been built with ‘Cstd’ and so an R package using such libraries also needs to be. Occasionally the option -library=stlport4,Crun has been needed.
Several CRAN packages using C++ need the more liberal interpretation given by adding
CXXFLAGS="-features=tmplrefstatic"
The performance library sunperf
is available for use with the
Solaris Studio compilers. If selected as a BLAS, it must also
be selected as LAPACK via (for Solaris Studio 12.2)
./configure --with-blas='-library=sunperf' --with-lapack
This has often given test failures in the past, in several different
places. At the time of writing it fails in tests/reg-BLAS.R, and on
some builds, including for ‘amd64’, it fails in
example(eigen)
.
Parsing very complex R expressions needs a lot of stack space when the Oracle compilers are used: several packages require the stack increased to at least 20MB.
• Using gcc: |
If using gcc
, ensure that the compiler was compiled for the
version of Solaris in use. (This can be ascertained from gcc
-v
.) gcc
makes modified versions of some header files, and
several reports of problems were due to using gcc
compiled on
one version of Solaris on a later version.
The notes here are for gcc
set up to use the Solaris linker:
it can also be set up to use GNU ld
, but that has not been
tested.
Compilation for a 32-bit Sparc target with gcc
4.9.0
needed
CPPFLAGS=-I/opt/csw/include LDFLAGS="-L/opt/csw/gcc4/lib -L/opt/csw/lib"
and for a 64-bit Sparc target
CC="gcc -m64" F77="gfortran -m64" CXX="g++ -m64" FC=$F77 CPPFLAGS=-I/opt/csw/include LDFLAGS="-L/opt/csw/gcc4/lib/sparcv9 -L/opt/csw/lib/sparcv9"
Note that paths such as /opt/csw/gcc4/lib/sparcv9 may need to
be in the
LD_LIBRARY_PATH
during configuration.
The compilation can be tuned to a particular cpu: the CRAN
check system uses -mtune=niagara2
.
Compilation for an ‘x86’ target with gcc
4.9.0
needed
CC="/opt/csw/gcc4/bin/gcc -m32" CPPFLAGS="-I/opt/csw/include -I/usr/local/include" F77="/opt/csw/gcc4/bin/gfortran -m32" CXX="/opt/csw/gcc4/bin/g++ -m32" FC="/opt/csw/gcc4/bin/gfortran -m32" LDFLAGS="-L/opt/csw/gcc4/lib -L/opt/csw/lib -L/usr/local/lib"
(-L/opt/csw/lib
is needed since TeXLive was built using
32-bit gcc
, and we need /opt/csw/lib in
R_LD_LIBRARY_PATH
.)
For an ‘amd64’ target with gcc
4.9.0
we used
CC="/opt/csw/gcc4/bin/gcc -m64" CPPFLAGS="-I/opt/csw/include -I/usr/local/include" F77="/opt/csw/gcc4/bin/gfortran -m64" FPICFLAGS=-fPIC CXX="/opt/csw/gcc4/bin/g++ -m64" FC=$F77 FCPICFLAGS=$FPICFLAGS LDFLAGS="-L/opt/csw/gcc4/lib/amd64 -L/opt/csw/lib/amd64"
Next: FreeBSD, Previous: Solaris, Up: Platform notes [Contents][Index]
We no longer support AIX prior to 4.2, and configure
will
throw an error on such systems.
Ei-ji Nakama was able to build under AIX 5.2 on ‘powerpc’ with GCC 4.0.3 in several configurations. 32-bit versions could be configured with --without-iconv as well as --enable-R-shlib. For 64-bit versions he used
OBJECT_MODE=64 CC="gcc -maix64" CXX="g++ -maix64" F77="gfortran -maix64" FC="gfortran -maix64"
and was also able to build with the IBM xlc
and Hitachi
f90
compilers by
OBJECT_MODE=64 CC="xlc -q64" CXX="g++ -maix64" F77="f90 -cpu=pwr4 -hf77 -parallel=0 -i,L -O3 -64" FC="f90 -cpu=pwr4 -hf77 -parallel=0 -i,L -O3 -64" FLIBS="-L/opt/ofort90/lib -lhf90vecmath -lhf90math -lf90"
Some systems have f95
as an IBM compiler that does not by
default accept FORTRAN 77. It needs the flag -qfixed=72, or to
be invoked as xlf_r
.
The AIX native iconv
does not support encodings ‘latin1’ nor
‘""’ and so cannot be used. (As far as we know GNU
libiconv
could be installed.)
Fan Long reports success on AIX 5.3 using
OBJECT_MODE=64 LIBICONV=/where/libiconv/installed CC="xlc_r -q64" CFLAGS="-O -qstrict" CXX="xlC_r -q64" CXXFLAGS="-O -qstrict" F77="xlf_r -q64" AR="ar -X64" CPPFLAGS="-I$LIBICONV/include -I/usr/lpp/X11/include/X11" LDFLAGS="-L$LIBICONV/lib -L/usr/lib -L/usr/X11R6/lib"
On one AIX 6.x system it was necessary to use R_SHELL
to set the
default shell to be Bash rather than Zsh.
Kurt Hornik and Stefan Theussl at WU (Wirtschaftsuniversität Wien) successfully built R on a ‘powerpc’ (8-CPU Power6 system) running AIX 6.1, configuring with or without --enable-R-shlib (Ei-ji Nakama’s support is gratefully acknowledged).
It helps to describe the WU build environment first. A small part of
the software needed to build R and/or install packages is available
directly from the AIX Installation DVDs, e.g., Java 6, X11, and Perl.
Additional open source software (OSS) is packaged for AIX in .rpm
files and available from both IBM’s “AIX Toolbox for Linux
Applications”
(http://www-03.ibm.com/systems/power/software/aix/linux/) and
http://www.oss4aix.org/download/. The latter website typically
offers more recent versions of the available OSS. All tools needed and
libraries downloaded from these repositories (e.g., GCC, Make,
libreadline
, etc.) are typically installed to
/opt/freeware, hence corresponding executables are found in
/opt/freeware/bin which thus needs to be in PATH
for using
these tools. As on other Unix systems one needs GNU
libiconv
as the AIX version of iconv is not sufficiently
powerful. Additionally, for proper Unicode compatibility one should
install the corresponding package from the ICU project
(http://www.icu-project.org/download/), which offers pre-compiled
binaries for various platforms which in case of AIX can be installed via
unpacking the tarball to the root file system. For full LaTeX
support one can install the TeX Live DVD distribution
(http://www.tug.org/texlive/): it is recommended to update the
distribution using the tlmgr
update manager. For 64-bit R builds
supporting Tcl/Tk this needs to installed from the sources as available
pre-compiled binaries supply only 32-bit shared objects.
The recent WU testing was done using compilers from both the GNU Compiler Collection (version 4.2.4) which is available from one of the above OSS repositories, and the IBM C/C++ (XL C/C++ 10.01) as well as FORTRAN (XL Fortran 12.01) compilers (http://www14.software.ibm.com/webapp/download/byproduct.jsp#X).
To compile for a 64-bit ‘powerpc’ (Power6 CPU) target one can use
CC ="gcc -maix64 -pthread" CXX="g++ -maix64 -pthread" FC="gfortran -maix64 -pthread" F77="gfortran -maix64 -pthread" CFLAGS="-O2 -g -mcpu=power6" FFLAGS="-O2 -g -mcpu=power6" FCFLAGS="-O2 -g -mcpu=power6"
for the GCC and
CC=xlc CXX=xlc++ FC=xlf F77=xlf CFLAGS="-qarch=auto -qcache=auto -qtune=auto -O3 -qstrict -ma" FFLAGS="-qarch=auto -qcache=auto -qtune=auto -O3 -qstrict" FCFLAGS="-qarch=auto -qcache=auto -qtune=auto -O3 -qstrict" CXXFLAGS="-qarch=auto -qcache=auto -qtune=auto -O3 -qstrict"
for the IBM XL compilers. For the latter, it is important to note that
the decision for generating 32-bit or 64-bit code is done by setting the
OBJECT_MODE
environment variable appropriately (recommended) or
using an additional compiler flag (-q32 or -q64). By
default the IBM XL compilers produce 32 bit code. Thus, to build R with
64-bit support one needs to either export OBJECT_MODE=64
in the
environment or, alternatively, use the -q64 compiler options.
It is strongly recommended to install Bash and use it as the configure
shell, e.g., via setting CONFIG_SHELL=/usr/bin/bash
in the
environment, and to use GNU Make (e.g., via
(MAKE=/opt/freeware/bin/make
).
Further installation instructions to set up a proper R development environment can be found in the “R on AIX” project on R-Forge (http://R-Forge.R-project.org/projects/aix/).
Next: Cygwin, Previous: AIX, Up: Platform notes [Contents][Index]
There have been no reports for R 3.0.0 or later.
Next: New platforms, Previous: FreeBSD, Up: Platform notes [Contents][Index]
The Cygwin emulation layer on Windows can be treated as a Unix-alike OS. This is unsupported, but experiments have been conducted and a few workarounds added. Cygwin has not been tested for R 3.0.0 or later.
The 64-bit version is completely unsupported. The 32-bit version has
never worked well enough to pass R’s make check
.
R requires C99 complex type support, which is available as from
Cygwin 1.7.8 (March 2011). However, the (then) implementation of
cacos
gives incorrect results, so we undefine HAVE_CACOS
in src/main/complex.c on that platform. It has been reported
that some C99 long double mathematical functions are missing, so
configuring with --disable-long-double was required.
Only building as a shared library can possibly work,48 so use e.g.
./configure --disable-nls --enable-R-shlib FLIBS=-lgfortran make
Enabling NLS does work if required, although adding --with-included-gettext is preferable. You will see many warnings about the use of auto-import. Setting ‘FLIBS’ explicitly seems needed currently as the auto-detection gives an incorrect value.
You will need the tetex-extra Cygwin package to build NEWS.pdf and the vignettes.
Note that this gives you a command-line application using readline
for command editing. The ‘X11’ graphics device will work if a
suitable X server is running, and the standard Unix-alike ways of
installing source packages work. There was a bug in the
/usr/lib/tkConfig.sh script in the version we looked at, which
needs to have
TK_LIB_SPEC='-ltk84'
The overhead of using shell scripts makes this noticeably slower than a native build of R on Windows.
Even when R could be built, not all the tests passed: there were incorrect results from wide-character regular expressions code and from sourcing CR-delimited files.
Do not use Cygwin’s BLAS library: it is known to give incorrect results.
Previous: Cygwin, Up: Platform notes [Contents][Index]
There are a number of sources of problems when installing R on a new hardware/OS platform. These include
Floating Point Arithmetic: R requires arithmetic compliant
with IEC 60559, also known as IEEE 754.
This mandates the use of plus and minus infinity and NaN
(not a
number) as well as specific details of rounding. Although almost all
current FPUs can support this, selecting such support can be a pain.
The problem is that there is no agreement on how to set the signalling
behaviour; Sun/Sparc, SGI/IRIX and ‘ix86’ Linux require no
special action, FreeBSD requires a call to (the macro)
fpsetmask(0)
and OSF1 required that computation be done with a
-ieee_with_inexact flag etc. On a new platform you must find
out the magic recipe and add some code to make it work. This can often
be done via the file config.site which resides in the top level
directory.
Beware of using high levels of optimization, at least initially. On
many compilers these reduce the degree of compliance to the
IEEE model. For example, using -fast on the Solaris
Studio compilers has caused R’s NaN
to be set incorrectly, and
gcc
’s -ffast-math has given incorrect results.
Shared Objects: There seems to be very little agreement
across platforms on what needs to be done to build shared objects.
there are many different combinations of flags for the compilers and
loaders. GNU libtool cannot be used (yet), as it currently
does not fully support FORTRAN: one would need a shell wrapper for
this). The technique we use is to first interrogate the X window system
about what it does (using xmkmf
), and then override this in
situations where we know better (for tools from the GNU
Compiler Collection and/or platforms we know about). This typically
works, but you may have to manually override the results. Scanning the
manual entries for cc
and ld
usually reveals the
correct incantation. Once you know the recipe you can modify the file
config.site (following the instructions therein) so that the
build will use these options.
It seems that gcc
3.4.x and later on ‘ix86’ Linux
defeat attempts by the LAPACK code to avoid computations entirely in
extended-precision registers, so file src/modules/lapack/dlamc.f
may need to be compiled without optimization. Set the configure
variable SAFE_FFLAGS
to the flags to be used for this file. If
configure detects GNU FORTRAN it adds flag
-ffloat-store to FFLAGS
. (Other settings are needed when
using icc
on ‘ix86’ Linux, for example. Using
-mpc64 is preferable on more recent GCC compilers.)
If you do manage to get R running on a new platform please let us know about it so we can modify the configuration procedures to include that platform.
If you are having trouble getting R to work on your platform please feel free to use the ‘R-devel’ mailing list to ask questions. We have had a fair amount of practice at porting R to new platforms ...
Next: Function and variable index, Previous: Platform notes, Up: Top [Contents][Index]
If you want to build R or add-on packages from source in Windows, you will need to collect, install and test an extensive set of tools. See http://CRAN.R-project.org/bin/windows/Rtools/ for the current locations and other updates to these instructions. (Most Windows users will not need to build add-on packages from source; see Add-on packages for details.)
We have found that the build process for R is quite sensitive to the choice of tools: please follow our instructions exactly, even to the choice of particular versions of the tools.49 The build process for add-on packages is somewhat more forgiving, but we recommend using the exact toolset at first, and only substituting other tools once you are familiar with the process.
This appendix contains a lot of prescriptive comments. They are here as a result of bitter experience. Please do not report problems to the R mailing lists unless you have followed all the prescriptions.
We have collected most of the necessary tools (unfortunately not all, due to license or size limitations) into an executable installer named50 Rtools31.exe, available from http://CRAN.R-project.org/bin/windows/Rtools/. You should download and run it, choosing the default “Package authoring installation” to build add-on packages, or the “full installation” if you intend to build R.
You will need the following items to build R and packages. See the subsections below for detailed descriptions.
For installing simple source packages containing data or R source but no compiled code, none of these are needed. Perl is no longer needed to build R nor to install nor develop source packages.
A complete build of R including PDF manuals, and producing the installer will also need the following:
qpdf
It is important to set your PATH
properly. The installer
Rtools*.exe optionally sets the path to components that it
installs.
Your PATH
may include . first, then the bin
directories of the tools, the compiler toolchain and LaTeX. Do not
use filepaths containing spaces: you can always use the short forms
(found by dir /x
at the Windows command line). Network shares
(with paths starting \\
) are not supported.
For example for a 32-bit build, all on one line,
PATH=c:\Rtools\bin;c:\Rtools\gcc-4.6.3\bin;c:\MiKTeX\miktex\bin; c:\R\R-3.1\bin\i386;c:\windows;c:\windows\system32
It is essential that the directory containing the command line tools comes first or second in the path: there are typically like-named tools51 in other directories, and they will not work. The ordering of the other directories is less important, but if in doubt, use the order above.
Our toolset contains copies of Cygwin DLLs that may conflict with other ones on your system if both are in the path at once. The normal recommendation is to delete the older ones; however, at one time we found our tools did not work with a newer version of the Cygwin DLLs, so it may be safest not to have any other version of the Cygwin DLLs in your path.
• LaTeX: | ||
• The Inno Setup installer: | ||
• The command line tools: | ||
• The MinGW-w64 toolchain: | ||
• Useful additional programs: |
Next: The Inno Setup installer, Previous: The Windows toolset, Up: The Windows toolset [Contents][Index]
The ‘MiKTeX’ (http://www.miktex.org/) distribution of
LaTeX includes a suitable port of pdftex
. This can be set up
to install extra packages ‘on the fly’, which is the simplest way to use
it (and the default). The ‘basic’ version of ‘MiKTeX’ almost
suffices: when last tested packages
epsf fancyvrb inconsolata listings mptopdf natbib upquote url
needed to be added (on the fly or via the ‘MiKTeX’ Package Manager) to install R. In any case ensure that the inconsolata package is installed—you can check with the ‘MiKTeX’ Package Manager.
The Rtools*.exe installer does not include any version of LaTeX.
It is also possible to use the TeXLive distribution from http://www.tug.org/texlive/.
Please read Making the manuals about how to make fullrefman.pdf
and set the environment variable R_RD4PDF
suitably; ensure you
have the required fonts installed or that ‘MiKTeX’ is set up to
install LaTeX packages on first use.
Next: The command line tools, Previous: LaTeX, Up: The Windows toolset [Contents][Index]
To make the installer package (R-3.1.1-win.exe) we currently require the Unicode version of Inno Setup 5.3.7 or later from http://jrsoftware.org/. This is not included in Rtools*.exe.
Copy file src/gnuwin32/MkRules.dist to
src/gnuwin32/MkRules.local and edit it to set ISDIR
to the
location where Inno Setup was installed.
Next: The MinGW-w64 toolchain, Previous: The Inno Setup installer, Up: The Windows toolset [Contents][Index]
This item is installed by the Rtools*.exe installer.
If you choose to install these yourself, you will need suitable versions
of at least basename
, cat
, cmp
, comm
,
cp
, cut
, date
, diff
, du
, echo
,
expr
, gzip
, ls
, make
, makeinfo
,
mkdir
, mv
, rm
, rsync
, sed
, sh
,
sort
, tar
, texindex
, touch
and uniq
;
we use those from the Cygwin distribution
(http://www.cygwin.com/) or compiled from the sources. You will
also need zip
and unzip
from the Info-ZIP project
(http://www.info-zip.org/). All of these tools are in
Rtools*.exe.
Beware: ‘Native’ ports of make are not suitable
(including those called ‘MinGW make’ at the MinGW SourceForge site and
mingw32-make
in some MinGW-w64 distributions). There were
also problems with other versions of the Cygwin tools and DLLs. To
avoid frustration, please use our tool set, and make sure it is at the
front of your path (including before the Windows system directories).
If you are using a Windows shell, type PATH
at the prompt to find
out.
You may need to set the environment variable CYGWIN
to a value
including ‘nodosfilewarning’ to suppress messages about
Windows-style paths.
Next: Useful additional programs, Previous: The command line tools, Up: The Windows toolset [Contents][Index]
Technically you need more than just a compiler so the set of tools is referred to as a ‘toolchain’.
The preferred toolchain since R 2.14.2 is part of
Rtools30.exe
: this uses a beta version of gcc 4.6.3
and version 2.0.1 of the MinGW-w64 project’s runtime.
This toolchain uses multilib: that is there is a single front-end
such as gcc.exe
for each of the compilers and 32-bit (the
default) and 64-bit compilation are selected by the flags52 -m32 and -m64
respectively. The tools are all 32-bit Windows executables and should
be able to run on any current version of Windows—however you do need a
64-bit version of Windows to build 64-bit R as the build process runs
R.
To select a 32-bit or 64-bit build of R, set the options in MkRules.local appropriately (following the comments in the file).
Some external software libraries will need to be re-compiled under the new toolchain: especially those providing a C++ interface. Many of those used by CRAN packages are available from http://www.stats.ox.ac.uk/pub/Rtools/multilib/. Users developing packages with Rcpp need to ensure that they use a version built with exactly the same toolchain as their package: the recommendation is to build Rcpp from its sources yourself.
There is support for OpenMP and pthreads in this toolchain. As the performance of OpenMP on Windows is poor for small tasks, it is not used for R itself.
Previous: The MinGW-w64 toolchain, Up: The Windows toolset [Contents][Index]
The process of making the installer will make use of qpdf
to
compact some of the package vignettes, if it is available. Windows
binaries of qpdf
are available from
http://sourceforge.net/projects/qpdf/files/. Set the path
to the qpdf
installation in file MkRules.local.
Developers of packages will find some of the ‘goodies’ at http://www.stats.ox.ac.uk/pub/Rtools/goodies useful.
There is a version of the file
command that identifies the
type of files, and is used by Rcmd check
if available. The
binary distribution is included in Rtools30.exe.
The file xzutils.zip contains the program xz
which can
be used to (de)compress files with that form of compression.
Next: Concept index, Previous: The Windows toolset, Up: Top [Contents][Index]
Jump to: | C I M R U |
---|
Jump to: | C I M R U |
---|
Next: Environment variable index, Previous: Function and variable index, Up: Top [Contents][Index]
Jump to: | A B F I L M O P R S U V W |
---|
Jump to: | A B F I L M O P R S U V W |
---|
Previous: Concept index, Up: Top [Contents][Index]
Jump to: | B C D F J L O P R T |
---|
Jump to: | B C D F J L O P R T |
---|
e.g. GNU
tar
version 1.15 or later, or that from the ‘libarchive’
(as used on OS X versions 10.6 and later) or ‘Heirloom Toolchest’
distributions.
for some Subversion clients ‘http:’ may appear to work, but requires continual redirection.
Most aspects will work with
paths containing spaces, but external software used by R, e.g.
texi2dvi
version 4.8
, may not.
which use lib rather than lib64 for their primary 64-bit library directories.
for example, if you configured R with --without-recommended.
Instructions on how to install the latest version are at http://www.ctan.org/tex-archive/fonts/inconsolata/.
on a
Unix-alike, ‘inconsolata’ is omitted if not found by
configure
.
The linktoc
settings require hyperref version 6.78f or newer; with older versions of
hyperref use linktocpage=false
to hyperlink the text.
This will be needed if more than one sub-architecture is to be installed.
with possible values ‘i386’, ‘x64’, ‘32’ and ‘64’.
mainly on RedHat and Fedora, whose layout is described here.
How to prepare such a directory is described in file src/extra/tzone/Notes in the R sources.
unless they were excluded in the build.
its binding is locked once the startup files have been read, so users cannot easily change it.
If a proxy needs to be set, see
?download.file
.
for a small number of CRAN packages where this is known to be safe and is needed by the autobuilder this is the default. Look at the source of tools:::.install_packages for the list. It can also be specified in the package’s DESCRIPTION file.
or by adding it in a file such as etc/i386/Makevars.site, which does not exist by default.
‘X/Open Portability Guide’, which has had several versions.
On some systems setting
LC_ALL
or LC_MESSAGES
to ‘C’ disables LANGUAGE
.
If you try changing from French to Russian except in a UTF-8 locale, you will most likely find messages change to English.
the language written in England: some people living in the USA appropriate this name for their language.
with Americanisms.
also known as IEEE 754
at least when storing quantities: the on-FPU precision is allowed to vary
e.g. Bessel, beta and gamma functions
including copying MkRules.dist to MkRule.local and selecting the architecture.
also known as IEEE 754
Note
that C11 compilers need not be C99-compliant: R requires support for
double complex
and variable-length arrays which are optional in
C11 but is mandatory in C99.
-std=c99 excludes POSIX functionality, but config.h will turn on all GNU extensions to include the POSIX functionality.
specifically, the C99
functionality of headers wchar.h and wctype.h, types
wctans_t
and mbstate_t
and functions mbrtowc
,
mbstowcs
, wcrtomb
, wcscoll
, wcstombs
,
wctrans
, wctype
, and iswctype
.
including the opendir
, readdir
,
closedir
, popen
, stat
, glob
, access
,
getcwd
and chdir
system calls, and either putenv
or
setenv
.
such as
realpath
, symlink
.
Such as
GNU tar
1.15 or later, bsdtar
(from
http://code.google.com/p/libarchive/, as used by FreeBSD and OS
10.6 and later) or tar
from the Heirloom Toolchest
(http://heirloom.sourceforge.net/tools.html).
texi2dvi
is normally a
shell script. Some versions, e.g. that from texinfo 4.13a and
5.2, need to be run under bash
rather than a Bourne shell as
on, say, Solaris.
also known as ttf-mscorefonts-installer
in the
Debian/Ubuntu world: see also
http://en.wikipedia.org/wiki/Core_fonts_for_the_Web.
ttf-liberation
in Debian/Ubuntu.
which is what is supplied with R: PCRE must be built
with UTF-8 support (not the default) and support for Unicode properties
is assumed by some R packages. Neither are tested by
configure
.
Using the Oracle Solaris Studio
cc
and f95
compilers
We have measured 15–20% on ‘i686’ Linux and around 10% on ‘x86_64’ Linux.
On HP-UX fort77
is the
POSIX compliant FORTRAN compiler, and comes after
g77
.
as well as its equivalence to the Rcomplex
structure defined in R_ext/Complex.h.
for example, X11 font at size 14 could not
be loaded
.
or -mtune=corei7
for Intel Core
i3/15/17 with gcc >= 4.6.0
.
These days that is defined by Apple’s
implementation of clang
, so it is strongly recommended to use
that.
This
is a tarball which needs to be unpacked in the Terminal by e.g.
sudo tar -zxf gfortran-4.8.2-darwin13.tar.bz2 -C /
.
It is reported that for some non-Apple toolchains
CPPFLAGS
needed to contain -D__ACCELERATE__
.
including gcc
for
Sparc from Oracle.
Windows DLLs need to have all links resolved at build time and so cannot resolve against R.bin.
For
example, the Cygwin version of make 3.81
fails to work
correctly.
for R 3.0.0 and later.
such as sort
, find
and perhaps
make
.
these flags apply to the compilers: some of the tools use different flags. 32-bit builds are the default.